subsonic on audiopipe 1500d

[loburbon]

i just went and checked roe and they have 1hz up sine waves

[indytrucks]

I'm 100% positive they have every tone you could need one ROE. I have them on my iPhone for just this reason.

Edited August 14, 2009 by indytrucks

[ben29555]

waht di you go under to find that 28hz?

[EricM9104]

Box tuned at 29Hz, 2.5cubes, set to about the halfway mark now.

Bass i love you almost made my fi q 12 go emo at half volume lol.

[ben29555]

so put it a little above where you have it since my box is tuned a bit higher?

[Decaf]

come on, u dont need a tone nor is it good to suggest to play that low which could be well below tuning with a test tone

lol

its 0-50hz.... so turn it up a little past 2/5s of a full rotation.... should be in the mid 20s... pretty easy

[loburbon]

come on, u dont need a tone nor is it good to suggest to play that low which could be well below tuning with a test tone

lol

its 0-50hz.... so turn it up a little past 2/5s of a full rotation.... should be in the mid 20s... pretty easy

i do this for a living, and anybody with any amount of common sense can tune an amp this way. and a 28hz tone at moderate volume wont hurt anything. it will help him set that subsonic without guessing if he set it right. do you set your gains blind? i dont think so, then why would you set your ss that way.

[Team_DC-Derrick]

here, if hes setting gains and not subsonic use this

[Decaf]

i do this for a living, and anybody with any amount of common sense can tune an amp this way. and a 28hz tone at moderate volume wont hurt anything. it will help him set that subsonic without guessing if he set it right. do you set your gains blind? i dont think so, then why would you set your ss that way.

since when does a 1-5hz difference matter on a subsonic setting so long as its 5-10hz below tuning, guessing is fine unless u are trying to put ur subsonic at ur tune frequency spot on the nose

ur right, if u want to know the exact number thats a fine way to be sure... few need to tho

on a side note, i wish the rf1000dbs had a selectable ssf instead of a off/on 28hz

[loburbon]

well i guess the reason it matters to me is that i run and sell mostly dd subs. and the dd subs play well below tuning. so when i set up the amps i want to know that they can play the music they want safely. also i to hate the rockford set ss filter. i have a friend that i did his car and when a dd amp is in there he can play put on, and hit all the notes, yet with his rockford amps hooked up he cant play the 4th note