Thewes Posted August 14, 2009 Report Share Posted August 14, 2009 Just bought 2 sets of Re Audio Re Components. I was wondering if they would all be able to handle 2 Sundown 125.2s? Quote Link to comment Share on other sites More sharing options...
pimpedout97x Posted August 15, 2009 Report Share Posted August 15, 2009 just use one. they do over 200 x 2 @ 2 ohms, so each door would get at LEAST 100w, prally more like 125 per door, which is plenty. Quote Link to comment Share on other sites More sharing options...
iTech Posted August 15, 2009 Report Share Posted August 15, 2009 just use one. they do over 200 x 2 @ 2 ohms, so each door would get at LEAST 100w, prally more like 125 per door, which is plenty. Aren't those components 4 ohms? In that case use both amps. 1 for each pair/set. Quote My Official Feedback Thread PSN - tech2332 Games for PS3: Killzone 2, BattleField: Bad Company 2! Add me to play either! Link to comment Share on other sites More sharing options...
Decaf Posted August 15, 2009 Report Share Posted August 15, 2009 just turn the gain down some and be gentle likely ull want to start the tweeter off in the lowest setting... -3 or something like that Quote Link to comment Share on other sites More sharing options...
Thewes Posted August 15, 2009 Author Report Share Posted August 15, 2009 just turn the gain down some and be gentlelikely ull want to start the tweeter off in the lowest setting... -3 or something like that Setting? Explain... On HU? Crossover? Quote Link to comment Share on other sites More sharing options...
Decaf Posted August 15, 2009 Report Share Posted August 15, 2009 they are just a bit on the bright side iirc the crossover that comes with them says it has a Tweeter Attenuation Control... or a switch or something to lower or raise the tweeter level in the crossover Quote Link to comment Share on other sites More sharing options...
Thewes Posted August 15, 2009 Author Report Share Posted August 15, 2009 they are just a bit on the bright side iircthe crossover that comes with them says it has a Tweeter Attenuation Control... or a switch or something to lower or raise the tweeter level in the crossover These are the RE RE components, not the XXXs. My crossovers have no switch Quote Link to comment Share on other sites More sharing options...
AI James Posted August 15, 2009 Report Share Posted August 15, 2009 id put both sets one 1 amp, imo those comps will see the best they are gonna do off that Quote Link to comment Share on other sites More sharing options...
pimpedout97x Posted August 15, 2009 Report Share Posted August 15, 2009 Aren't those components 4 ohms? In that case use both amps. 1 for each pair/set. yes they are, but he has 2 sets. if he uses a single 125.2, and he wires the drivers side (front and rear door) in parallel to the left channel, thatll make 2 ohm on the amp. same with the passenger side, wired to the right channel. These are the RE RE components, not the XXXs. My crossovers have no switch i think they do, ill double check next time you come over. Quote Link to comment Share on other sites More sharing options...
Bigg Boy Posted August 22, 2009 Report Share Posted August 22, 2009 Could always also go active Quote Dodge Magnum with custom 300c front end, laid out on air bags *4) 12" Cadence Daytona walled *1) AudioQue 20k *270a DC Power Alt (Dual coming soon) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.