pstone11 Posted April 13, 2007 Report Posted April 13, 2007 So, I was looking through my T2K owners manual, and it says that my phase switches on both amps should ba at 0 - makes sense - two t20001's, one master, one slave, one amp per sub (18" dual 2 BTL's wired to 1 ohm). These things sound 10x quieter with the switches on 0 - one switch (either amp) has to be on 180, and the other on 0 to even be loud... WTF is that?? Maybe a switched RCA??, That's all I can really think of. I'd check now, but it's raining so I figured I'd pick your brains. I'm at a loss - they sound incredible, but only on 180 and 0. I don't want anything to fuck up because of this... Quote Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
Derrick824 Posted April 13, 2007 Report Posted April 13, 2007 Sounds like one of your subs is wired backwards. Quote
Ray Posted April 13, 2007 Report Posted April 13, 2007 x2 Quote 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz
pstone11 Posted April 13, 2007 Author Report Posted April 13, 2007 x2 That's crazy - I wired them identical sitting right next to eachother on the bench - I'll check it for sure though... Quote Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
Chris Posted April 14, 2007 Report Posted April 14, 2007 Check your input sensitivity on them both also. When I master/slaved my amps, I had to make sure they were both set the same. Otherwise, like you said, they were quiet. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
pstone11 Posted April 14, 2007 Author Report Posted April 14, 2007 Just had the wires crossed on the slave amp - what an idiot :blush: Quote Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
Chris Posted April 15, 2007 Report Posted April 15, 2007 Just had the wires crossed on the slave amp - what an idiot :blush: Good ridance! happens to the best of 'em Damn straight. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
Slinky Posted April 15, 2007 Report Posted April 15, 2007 you have to be carefull when switching those wires back. i accidentally had my pa's wires backwards once and i switched em back when the amps were on and i got shocked! Quote DD M4 Rockford Fosgate P500-4 SoundQubed HDC415 w carbon fiber cap 2 Rockford Fosagate T1675-S XS Power D3400 Under Hood XS Power D5100 in rear Michael Singer 200A Alt Build Log: http://www.stevemeadedesigns.com/board/topic/153901-2012-veloster-update-842013-wall-build-4-15s/
Guest Nismofreak Posted April 15, 2007 Report Posted April 15, 2007 you have to be carefull when switching those wires back. i accidentally had my pa's wires backwards once and i switched em back when the amps were on and i got shocked! Gettin shocked had to be fun . reminds me when I was smaller what would happen if I put a key in a electrical socket do to me at age 4. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.