Pioneer~Saturn Posted November 4, 2009 Report Share Posted November 4, 2009 Alright, this enclosure will be for Scapelli's pair of 12's which will most likely be Nightshades iirc. Specs come to: -4.3 cubes net -6" aero port -30hz tuning Got a bit done tonight, pieces cut and edges of the side panels rabbeted for ease of carpeting later.. Back on.. Side on.. More as it happens Quote Team Tupperware <First dual-alternator 'real' Saturn (pre-2002) on the planet>(3) 15" Fi SP4's fed by (2) M3a's strapped @ .66712.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)Stock alt position (custom bracket) 225 amp Mechman Roof = steel and fiberglass (u mad?)(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)4 power+ 4 ground runs of 1/0-gauge to rear"If its been done before...you're doing it wrong" : ) "stfu about scores and float $hit..." Link to comment Share on other sites More sharing options...
Nightshade Posted November 4, 2009 Report Share Posted November 4, 2009 Why only a single 6" port? I don't agree with that at all. The least amount of port area I would have went with would have been 4 4" ports. Trust me as I am speaking from experience that a single 6 will not let those sub show their full potential. I am just trying to help is all, not trying to cause any issues what so ever. Quote 2013 VW Jetta GLI 2.0 Turbo 1 Sundown Audio SCV2000 1 Sundown Audio X15 V2 1 XS Power D3100 Audio Control LC6i Stock Deck 146.4 sealed on the dash at 37hz 2001 Focus ZX3: RETIRED Team Sundown Audio, Team XS Power, 2 time NSPL Car 3601-Up Champion, 2 time NSPL Car Hardcore ChampionHighest NSPL Scores to date:154.3db on the dash sealed at 46hz, 156.2db in the kick at 46hz155.2db unofficial on dash at 43hz Link to comment Share on other sites More sharing options...
Pioneer~Saturn Posted November 5, 2009 Author Report Share Posted November 5, 2009 (edited) Why only a single 6" port? I don't agree with that at all. The least amount of port area I would have went with would have been 4 4" ports. Trust me as I am speaking from experience that a single 6 will not let those sub show their full potential. I am just trying to help is all, not trying to cause any issues what so ever. Because this is all of the space he has and it's darn close to 7 sq inches of port per cube, which is a ratio many people use for aero port area...and anymore port area and it couldnt be tuned low at all due to length constraints for the port(s), which was his main goal (to tune low) Edited November 5, 2009 by Pioneer~Saturn Quote Team Tupperware <First dual-alternator 'real' Saturn (pre-2002) on the planet>(3) 15" Fi SP4's fed by (2) M3a's strapped @ .66712.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)Stock alt position (custom bracket) 225 amp Mechman Roof = steel and fiberglass (u mad?)(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)4 power+ 4 ground runs of 1/0-gauge to rear"If its been done before...you're doing it wrong" : ) "stfu about scores and float $hit..." Link to comment Share on other sites More sharing options...
Pioneer~Saturn Posted November 6, 2009 Author Report Share Posted November 6, 2009 More tomorrow Quote Team Tupperware <First dual-alternator 'real' Saturn (pre-2002) on the planet>(3) 15" Fi SP4's fed by (2) M3a's strapped @ .66712.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)Stock alt position (custom bracket) 225 amp Mechman Roof = steel and fiberglass (u mad?)(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)4 power+ 4 ground runs of 1/0-gauge to rear"If its been done before...you're doing it wrong" : ) "stfu about scores and float $hit..." Link to comment Share on other sites More sharing options...
87accord Posted November 6, 2009 Report Share Posted November 6, 2009 looks good so far man Quote new system in the works (3) DC lvl 4xls 15's (one of three are here) (2) DD z1 (done) old kenwood four ch 4 runs of 2/0 (done) ? 200 amp alt may two ?? Link to comment Share on other sites More sharing options...
Pioneer~Saturn Posted November 6, 2009 Author Report Share Posted November 6, 2009 Thanks I'll have the port a bit later today and hoping to have this structurally done by tonight Quote Team Tupperware <First dual-alternator 'real' Saturn (pre-2002) on the planet>(3) 15" Fi SP4's fed by (2) M3a's strapped @ .66712.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)Stock alt position (custom bracket) 225 amp Mechman Roof = steel and fiberglass (u mad?)(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)4 power+ 4 ground runs of 1/0-gauge to rear"If its been done before...you're doing it wrong" : ) "stfu about scores and float $hit..." Link to comment Share on other sites More sharing options...
newls1 Posted November 6, 2009 Report Share Posted November 6, 2009 damn fine work SON! Quote I love my staffie So anti FACEBOOK it isn't even funny Link to comment Share on other sites More sharing options...
Pioneer~Saturn Posted November 9, 2009 Author Report Share Posted November 9, 2009 Mo' picz.. Quote Team Tupperware <First dual-alternator 'real' Saturn (pre-2002) on the planet>(3) 15" Fi SP4's fed by (2) M3a's strapped @ .66712.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)Stock alt position (custom bracket) 225 amp Mechman Roof = steel and fiberglass (u mad?)(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)4 power+ 4 ground runs of 1/0-gauge to rear"If its been done before...you're doing it wrong" : ) "stfu about scores and float $hit..." Link to comment Share on other sites More sharing options...
Pioneer~Saturn Posted November 9, 2009 Author Report Share Posted November 9, 2009 Resin.. Just need to clean it up a bit and get it carpeted and then the exterior pieces of the port will go in..more tomorrow night Quote Team Tupperware <First dual-alternator 'real' Saturn (pre-2002) on the planet>(3) 15" Fi SP4's fed by (2) M3a's strapped @ .66712.75 cubes net @ 25Hz with 200 sq inches of port area (lowz...?)Stock alt position (custom bracket) 225 amp Mechman Roof = steel and fiberglass (u mad?)(2) XS Power D3100's, (2) rhino batts, No battery upfront (for now, smh)4 power+ 4 ground runs of 1/0-gauge to rear"If its been done before...you're doing it wrong" : ) "stfu about scores and float $hit..." Link to comment Share on other sites More sharing options...
sounddesires Posted November 9, 2009 Report Share Posted November 9, 2009 looks good man..cant wait to see more..that brace for the ports looks pretty badass.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.