Doylerules826 Posted December 28, 2009 Report Share Posted December 28, 2009 Its showing you a 1.5 din kit to cut out to put your double din radio in, but it wont work since the kit is still only 1.5 din kit with a 1 din radio and pocket.You would need to find a 2 din kit to make what he is thinking work, which they dont make for the blazer since they dont have 2 din kits. No, a 2003 blazer is the same body style, different style dash but both using a delco 1.5 din radio (the 2003 just has a theftlock style radio, and the 97 uses the old delco crap that came in literately every earlier gm). You wont find no kit, you will have to cut up your dask. Im guessing the room is there if this is like yours? [[/img] The 1.5 din radio openings are wider then double dins or single dins so thats not an issue, you will need to make filler panels to hid some holes. Your going to have to cut into that pocket under your radio, if something is already there you may need to relocate it to another spot. Making the hole is the easy thing, finding a proper way to mount it may get tricky. Im sure you could re-use the top hardware from the current stock radio to secure the top after a little playing. Just need to find a way for the bottom. ^that dash shows NO signs of being cut. 2000 chevy blazer Avic n1 Link to comment Share on other sites More sharing options...
TeejayBee Posted December 28, 2009 Author Report Share Posted December 28, 2009 that dash is also from a 2002 S-10 truck i have a 97 S-10 blazer Link to comment Share on other sites More sharing options...
audiofanaticz Posted December 28, 2009 Report Share Posted December 28, 2009 ^that dash shows NO signs of being cut. Obviously we have another MASTER INSTALLER that has no idea the difference between a "dash" and the "dash bezel" that goes around the dash. So lets take a look into Doylerules photobucket account!! Hmm, nothing looks cut here, these wavey straight lines come factory from gm!! Moving on. In this pic towards the top right, it just looks like the plastic in the way was just broke out.. Who cares about making a nice cut, no one will see it!! Is this Jb weld? Link to comment Share on other sites More sharing options...
audiofanaticz Posted December 28, 2009 Report Share Posted December 28, 2009 Ok, rehosted pics on my pb account. Good luck deleted them doyle!!! Lols So here again, his cut dash. Plastic that was nicely broke off.. Because we all know its to much work to cut a small tab! And the jb weld pics.... Priceless!! Link to comment Share on other sites More sharing options...
AI James Posted December 28, 2009 Report Share Posted December 28, 2009 whats he trying to achieve Link to comment Share on other sites More sharing options...
itssteve Posted December 28, 2009 Report Share Posted December 28, 2009 this thread is full of laughs, but i hope you can figure it out man TEAM NEMESIS my system 1) us amps MD3D, us amps md21 2) kicker solo x 12 in 2.7ft^3 at 37hz Meca scores 1 xxx12" 141.8db at 40hz, 1 18 rd alpha v.2 145 db at 38hz , 2 12 orion hp 144.9 at 43hz Refs: hollatchaboy, schrummy, nitro_freak1,Brandon15zzz,Hellbound Train Link to comment Share on other sites More sharing options...
audiofanaticz Posted December 28, 2009 Report Share Posted December 28, 2009 whats he trying to achieve That you dont have to cut the dash. But I guess my meaning of the dash is different then his. Since he calls the dash bezel the dash.... When the dash bezel is the blue colored thing that goes over the dash. IMO the dash is the big thing that your instrument cluster, radio, heater, fuse box, glove box, air bags all get screwed to. Not some 2 pound flimsy blue beauty panel. Link to comment Share on other sites More sharing options...
AI James Posted December 28, 2009 Report Share Posted December 28, 2009 lmfao so you mean to tell me he cut the whole bezel rather then pull it off? Link to comment Share on other sites More sharing options...
n8ball2013 Posted December 28, 2009 Report Share Posted December 28, 2009 pulled the bezel just cut everything behind it to fit the double din then said that you didnt have to cut the dash at all. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
TeejayBee Posted December 28, 2009 Author Report Share Posted December 28, 2009 This is what my dash and behind it looks like. now explain how ima fit it lolz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.