Chris661 Posted March 2, 2010 Author Report Share Posted March 2, 2010 Says the depth of the box is only 14, then the port length is 20...you need to click "Check if Port Bends" ok i done it. Quote http://www.youtube.com/user/EAZYCHRIS?feature=mhee Link to comment Share on other sites More sharing options...
cqtama Posted March 2, 2010 Report Share Posted March 2, 2010 not to thread jack but why's everyone elses version of this calc have the port bends button? was there an updated version i have to download? anyway back on topic, new design looks much better Quote R.I.P '01 blazer you treated my ears well until your transmission blew up. New Project [top secret] 149.0 db on music driver window open; so close I feel some boners are fueled by viagra and not true intimacy!......if you know what i mean.... I swear... sometimes I wish I was retarded so I could just agree with everyone x. Link to comment Share on other sites More sharing options...
AUDIOADDICT02 Posted March 2, 2010 Report Share Posted March 2, 2010 sorry for double post. jst mess around abit more. hope this one look better then the first. re box cal. if this good port for the sub i will be going this one. PS box is going chevy s10 ext cab. thanks -chris port area is still way too small, use this site to help you figure out your minimum port area for that sub: http://www.carstereo.com/help/Articles.cfm?id=31 Quote CHECK OUT MY MYSPACE; SOME PAINT WORK I'VE DONE: http://www.myspace.c...customcreationz DODGE RAM 1500 QUAD CAB BOX BUILD: http://www.stevemead...showtopic=48978 DODGE RAM 1500 RUMBLEBEE EDITION CUSTOM ENCLOSURE: http://www.stevemead...showtopic=48983 PREFAB REMODELING: http://www.stevemead...box-remodeling/ G35 CUSTOM PAINTED L7 BOX: http://www.stevemead...om-painted-box/ CHEVY SINGLE CAB PAINTED SUB BOX/AMP RACK: http://www.stevemead...vy-boxamp-rack/ KICKER L512 BOX BUILT TO SPECS: http://www.stevemead...-kicker-l5-box/ RF HE2 10'S KERF PORTED BOX: http://www.stevemead...erf-ported-box/ 2 DC LEVEL 3 15'S KERF ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/115502-kerf-ported-enclosure/ 2 HCCA 15'S PORTED ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/129468-2-hcca-15s-enclosure/ Link to comment Share on other sites More sharing options...
Chris661 Posted March 2, 2010 Author Report Share Posted March 2, 2010 not to thread jack but why's everyone elses version of this calc have the port bends button? was there an updated version i have to download? anyway back on topic, new design looks much better i beleve there was an update. port area is still way too small, use this site to help you figure out your minimum port area for that sub: http://www.carstereo.com/help/Articles.cfm?id=31 ok i done that.. i get Minimum Diameter 13.23in Minimum Area =137.44in Length of a side for a square vent =11.72in i am think i have to come up with 137.44ish for the box port area. right?? sorry for so much questions. im learing nd every help will appratade. Quote http://www.youtube.com/user/EAZYCHRIS?feature=mhee Link to comment Share on other sites More sharing options...
AUDIOADDICT02 Posted March 2, 2010 Report Share Posted March 2, 2010 i beleve there was an update. ok i done that.. i get Minimum Diameter 13.23in Minimum Area =137.44in Length of a side for a square vent =11.72in i am think i have to come up with 137.44ish for the box port area. right?? sorry for so much questions. im learing nd every help will appratade. since you're not doing a round or square port, you can ignore the diameter & length for a square vent... right, you would have to come up with at least 137.44sq.in.(@32hz) of port area to avoid port noise.... Quote CHECK OUT MY MYSPACE; SOME PAINT WORK I'VE DONE: http://www.myspace.c...customcreationz DODGE RAM 1500 QUAD CAB BOX BUILD: http://www.stevemead...showtopic=48978 DODGE RAM 1500 RUMBLEBEE EDITION CUSTOM ENCLOSURE: http://www.stevemead...showtopic=48983 PREFAB REMODELING: http://www.stevemead...box-remodeling/ G35 CUSTOM PAINTED L7 BOX: http://www.stevemead...om-painted-box/ CHEVY SINGLE CAB PAINTED SUB BOX/AMP RACK: http://www.stevemead...vy-boxamp-rack/ KICKER L512 BOX BUILT TO SPECS: http://www.stevemead...-kicker-l5-box/ RF HE2 10'S KERF PORTED BOX: http://www.stevemead...erf-ported-box/ 2 DC LEVEL 3 15'S KERF ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/115502-kerf-ported-enclosure/ 2 HCCA 15'S PORTED ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/129468-2-hcca-15s-enclosure/ Link to comment Share on other sites More sharing options...
Chris661 Posted March 2, 2010 Author Report Share Posted March 2, 2010 since you're not doing a round or square port, you can ignore the diameter & length for a square vent... right, you would have to come up with at least 137.44sq.in.(@32hz) of port area to avoid port noise.... ok sound good. im play around more with torres cal. nd if i come up with something good ill post it up again. to verify if it correct. thanks so much guys. -CHRIS Quote http://www.youtube.com/user/EAZYCHRIS?feature=mhee Link to comment Share on other sites More sharing options...
Guest Posted March 2, 2010 Report Share Posted March 2, 2010 having a port THAT thin WILL cause port noise. make the port ratio smaller than 1:8 (1" by 8" or 2" by 16" or 3" by 24" etc etc. smaller would be 1 by 7 or 2 by 14 or 3 by 21, those are 1:7 ratios) Quote Link to comment Share on other sites More sharing options...
Chris661 Posted March 2, 2010 Author Report Share Posted March 2, 2010 first jst wanna say big thanks to the people who are helping me out!!! got some qestions. what in blue. tune i want 34hz but torres cal. say 36hz? what is in red. very close to port size cal. (146.03) nd torres cal. is (146.25) with this number it is tune to 34hz correct? one more question i see a ( - negitive number) could this mean bad??? what circle in yellow. thanks so much!!! -Chris ps i change the height of box so the port can clear the top part of the sits. Quote http://www.youtube.com/user/EAZYCHRIS?feature=mhee Link to comment Share on other sites More sharing options...
AUDIOADDICT02 Posted March 3, 2010 Report Share Posted March 3, 2010 first jst wanna say big thanks to the people who are helping me out!!! got some qestions. what in blue. tune i want 34hz but torres cal. say 36hz? what is in red. very close to port size cal. (146.03) nd torres cal. is (146.25) with this number it is tune to 34hz correct? one more question i see a ( - negitive number) could this mean bad??? what circle in yellow. thanks so much!!! -Chris ps i change the height of box so the port can clear the top part of the sits. make your port longer til it hits 34hz or make your port area bigger for 36hz... 146.25 is ok, 146.03 is just your minimum @34hz... not sure what the negative number could mean...??? just keep playing with it, til it all falls into place... Quote CHECK OUT MY MYSPACE; SOME PAINT WORK I'VE DONE: http://www.myspace.c...customcreationz DODGE RAM 1500 QUAD CAB BOX BUILD: http://www.stevemead...showtopic=48978 DODGE RAM 1500 RUMBLEBEE EDITION CUSTOM ENCLOSURE: http://www.stevemead...showtopic=48983 PREFAB REMODELING: http://www.stevemead...box-remodeling/ G35 CUSTOM PAINTED L7 BOX: http://www.stevemead...om-painted-box/ CHEVY SINGLE CAB PAINTED SUB BOX/AMP RACK: http://www.stevemead...vy-boxamp-rack/ KICKER L512 BOX BUILT TO SPECS: http://www.stevemead...-kicker-l5-box/ RF HE2 10'S KERF PORTED BOX: http://www.stevemead...erf-ported-box/ 2 DC LEVEL 3 15'S KERF ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/115502-kerf-ported-enclosure/ 2 HCCA 15'S PORTED ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/129468-2-hcca-15s-enclosure/ Link to comment Share on other sites More sharing options...
bcpballer64 Posted March 3, 2010 Report Share Posted March 3, 2010 first jst wanna say big thanks to the people who are helping me out!!! got some qestions. what in blue. tune i want 34hz but torres cal. say 36hz? what is in red. very close to port size cal. (146.03) nd torres cal. is (146.25) with this number it is tune to 34hz correct? one more question i see a ( - negitive number) could this mean bad??? what circle in yellow. thanks so much!!! -Chris ps i change the height of box so the port can clear the top part of the sits. Ya a negative port length would kinda be impossible. at the bottom of the page in the background you can calculate ideal port length. Quote "The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.