bigredishott Posted March 25, 2010 Report Share Posted March 25, 2010 I am hoping to get a free design for 3x Fosgate rfd2210's. I would like to get in the middle SQ vs SPL! Any designs could be emailed to to my screen name @hotmail.com. Crutchfield Specs Thanks in Advance for any help! You guys on this forum are AWESOME btw !! Alpine CDA-9847 HU F Highs 2x Infinity Kappa 60.9CS Powered by Eclipse EA4200 Glass door panels R Highs Infinity Ref. 9622i powered by HU 3x RF Punch HX2 RFD2210 Powered by MTX Thunder 81000D Box Vol. 3.259 before displacement, Tuned 36.6, Port area 54" Link to comment Share on other sites More sharing options...
bigredishott Posted March 25, 2010 Author Report Share Posted March 25, 2010 Here is a lil more info for any takers. Its a 2000 cirrus I have 14" to the magnets of my 6x9s and I think its just over 37" wide (remembering the size of my old box), I am out working without a tape. I am thinking 14h x 37w x say 20deep Can go a lil bigger there, would like to keep some trunk. lol I will be pushing them with an mtx thunder 81000d at 2.67 ohms its 1k rms at 2ohms and 12v and 1500rms at 14.4v 2ohms. Thanks for your intrest to help. Edit Measured 14H x 37W x 20D ({deep} more avalible here if needed) Guess my memory FAILS damn my teenage years lol Alpine CDA-9847 HU F Highs 2x Infinity Kappa 60.9CS Powered by Eclipse EA4200 Glass door panels R Highs Infinity Ref. 9622i powered by HU 3x RF Punch HX2 RFD2210 Powered by MTX Thunder 81000D Box Vol. 3.259 before displacement, Tuned 36.6, Port area 54" Link to comment Share on other sites More sharing options...
AI James Posted March 25, 2010 Report Share Posted March 25, 2010 if anyone does take you up on this they will want real dimensions rather then guesses...just a heads up also just looking unless your looking for sealed space is gonna be pretty tight Link to comment Share on other sites More sharing options...
bigredishott Posted March 30, 2010 Author Report Share Posted March 30, 2010 Do you guys think this box is too small for, three HX2 RFD2210 (crutchfield for specs) subs? I am thinking put the subs on the same side of the port. If you guys think it is too small, I was thinking I could have the port firing up and, the subs firing to the rear. Opinions Please. Alpine CDA-9847 HU F Highs 2x Infinity Kappa 60.9CS Powered by Eclipse EA4200 Glass door panels R Highs Infinity Ref. 9622i powered by HU 3x RF Punch HX2 RFD2210 Powered by MTX Thunder 81000D Box Vol. 3.259 before displacement, Tuned 36.6, Port area 54" Link to comment Share on other sites More sharing options...
AUDIOADDICT02 Posted March 30, 2010 Report Share Posted March 30, 2010 Do you guys think this box is too small for, three HX2 RFD2210 (crutchfield for specs) subs? I am thinking put the subs on the same side of the port. If you guys think it is too small, I was thinking I could have the port firing up and, the subs firing to the rear. Opinions Please. volume is good, but port area is a little on the small side.... I calculated 59sq.in. @35hz(14mm xmax) http://www.carstereo...icles.cfm?id=31 CHECK OUT MY MYSPACE; SOME PAINT WORK I'VE DONE: http://www.myspace.c...customcreationz DODGE RAM 1500 QUAD CAB BOX BUILD: http://www.stevemead...showtopic=48978 DODGE RAM 1500 RUMBLEBEE EDITION CUSTOM ENCLOSURE: http://www.stevemead...showtopic=48983 PREFAB REMODELING: http://www.stevemead...box-remodeling/ G35 CUSTOM PAINTED L7 BOX: http://www.stevemead...om-painted-box/ CHEVY SINGLE CAB PAINTED SUB BOX/AMP RACK: http://www.stevemead...vy-boxamp-rack/ KICKER L512 BOX BUILT TO SPECS: http://www.stevemead...-kicker-l5-box/ RF HE2 10'S KERF PORTED BOX: http://www.stevemead...erf-ported-box/ 2 DC LEVEL 3 15'S KERF ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/115502-kerf-ported-enclosure/ 2 HCCA 15'S PORTED ENCLOSURE: http://www.stevemeadedesigns.com/board/topic/129468-2-hcca-15s-enclosure/ Link to comment Share on other sites More sharing options...
bigredishott Posted March 30, 2010 Author Report Share Posted March 30, 2010 Thanks. I will look into that. Alpine CDA-9847 HU F Highs 2x Infinity Kappa 60.9CS Powered by Eclipse EA4200 Glass door panels R Highs Infinity Ref. 9622i powered by HU 3x RF Punch HX2 RFD2210 Powered by MTX Thunder 81000D Box Vol. 3.259 before displacement, Tuned 36.6, Port area 54" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.