Forevrbumpn Posted March 25, 2010 Report Posted March 25, 2010 (edited) I guess this thread is for anyone with the 9500G motors, or motors that have a really tight ID/OD for a coil . I had a guy come up to me, and wanted his 9500Gs reconed to handle more power, thought I had the right coils, but they would have been to tight on the inside gap. So I have some coils on order, they are a slight upgrade from factory, still copper, but using 2.25"ww over the factory 2", and flat copper, 4 layer with 3.018" ID, and 3.245" OD, 4.7" former height These coils should be able to fit from 10" - 15" maybe the 18" as well The advantage over factory coils is more throw, and should have a higher power handling. I only need 2, maybe 4, but stuck buying 12min -anyone interested in a kind of group buy? or just interested in buying a few? Costs will be about $25 each+ shipping No pictures yet, because the factory still has them Edited March 25, 2010 by Forevrbumpn Quote I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
dwright27 Posted March 25, 2010 Report Posted March 25, 2010 will this fit the HDC subs? Quote 2006 F-150 4 DC XL M2 18's Walled Daily Driver XS Power 4 DC 3.5kw Team DC Team S.P.L. Lot of Audio Technix and 1/0 DC Audio Dealer American Bass Dealer XS Power Dealer Audio Technix Dealer
Forevrbumpn Posted March 25, 2010 Author Report Posted March 25, 2010 That Iam sure of, the HDC subs have a wider gap than the DDs do but still a little tighter than more common coils Quote I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
ssackett Posted March 26, 2010 Report Posted March 26, 2010 will this fit the HDC subs? It will fit the HDC motor.. I have put a coil with a 3.3" OD in a few subs I have built with those motors. Quote Team S.S.C. DB Drag Street A 2011 National Champ DC Audio Dealer Nor Cal AA Dealer Incriminator Audio Dealer CA Sundown Audio Dealer [email protected]
Forevrbumpn Posted April 2, 2010 Author Report Posted April 2, 2010 Still looking for someone to do a group buy with these coils I know Ssackets in, anyone else? Quote I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
audiofanaticz Posted April 2, 2010 Report Posted April 2, 2010 Did you find specs of it? Normally im not nice enough to give them out, but your an exception I have both a 9500G and a 9500D flatwound coil (same coil used in the 9500Z also). If you need peramitors, i can grab the caliper from work, or even ship the coils off to you! Quote
Forevrbumpn Posted April 2, 2010 Author Report Posted April 2, 2010 I have a coil design up and ready for winding 3.018" ID 3.245" OD, 2.25"ww ( longer than factory) I tried everything with DD, THEY SEAR they dont make anything but these simple round wire copper coils for them. I tried and tried to get them upgraded, they wouldnt do Z coils, and they wouldnt do flat wire- This is when I had the customer try and get recone kits that are upgraded from stock, then I called them again, talked to Jack, and about 3 other guys, the 9500G motors, they wont do upgraded coils for Quote I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
audiofanaticz Posted April 2, 2010 Report Posted April 2, 2010 (edited) I have a coil design up and ready for winding 3.018" ID 3.245" OD, 2.25"ww ( longer than factory) I tried everything with DD, THEY SEAR they dont make anything but these simple round wire copper coils for them. I tried and tried to get them upgraded, they wouldnt do Z coils, and they wouldnt do flat wire- This is when I had the customer try and get recone kits that are upgraded from stock, then I called them again, talked to Jack, and about 3 other guys, the 9500G motors, they wont do upgraded coils for You speak to Brad at all? Anytime I call for orders or support, I always shoot for Brad, even tho Jack is our salesrep. The flat wire coils that I run in my D's are a bit bigger on ID and OD however then the G series, and at glance from the 9500Zs that where chilling on my table appeared to be idenical to the D coils I run. The G coil I have is also round. dual 1 iirc. Coil is like brand new, just burned tinsels iirc. And every G recone Ive ever done was round, not too sure if the flat is available tho. Maybe not just due to gap spec. But if theres any info I can get for you, just hit me up, you provide a good service for people at great prices, so anything i can do to help I will Edit: PS: In your recone thread, you gave me a great idea for shimming. Most the times I use a manila folder or clear transparency sheets. Never thought about the for sale type signs. I think that would work a bit better then having to overlap other items to get a thicker shim!! Edited April 2, 2010 by Audiofanaticz Quote
Forevrbumpn Posted April 2, 2010 Author Report Posted April 2, 2010 well, the guy bought recones last week, but Iam stuck buying these coils anyways. So I would say I got screwed, doing the recones for free now, and stuck with a bill He just got D1s, instead of the factory D0.5ohm coils Quote I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.
ilovetoinstall Posted April 4, 2010 Report Posted April 4, 2010 wait so how many coils do you have and how much my boy just blew 1 of his coils on his 9515 pm me if possible Quote Greg, Triple C Auto Niagara Falls NY Under construction2002 Chevy Suburban pioneer 8000NEX 3 Sets of ARC Audio 6000 components in custom front doors 2 Powerbass midrange in center council 4 Super tweets 2 Focal 900.6 6 channels 4 American Bass VFL Comp 15's (currently running 2) DC 12.0k DC Power dual alt bracket 2 XS Power D3400's under the hood 3 C&D technologies 110ah in rear along with multiple runs of 0 AWG OFC
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.