Jump to content
Second Skin Audio

Slap or bottoming out


Recommended Posts

How do I stop my subs from having a loud pop/slap whenever they hit a low note with quite a bit of excursion? I'm not over powering them, the only time I have this problem is when its cranked and on a low note. I'm thinking about raising my subsonic filter, but will this completely cut out the notes?

Link to comment
Share on other sites

some info would be nice, what kinda subs, how much power, box specs

R.I.P '01 blazer you treated my ears well until your transmission blew up.

New Project

[top secret]

149.0 db on music driver window open; so close

I feel some boners are fueled by viagra and not true intimacy!......if you know what i mean....

I swear... sometimes I wish I was retarded so I could just agree with everyone x.
Link to comment
Share on other sites

The reason it is bottoming out is because the note you are trying to play is below your tuning therefor they are unloading. What I do is play a test tone that is 1-2 hz below your tuning and then set the SSF accordingly.

i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work?

Link to comment
Share on other sites

The reason it is bottoming out is because the note you are trying to play is below your tuning therefor they are unloading. What I do is play a test tone that is 1-2 hz below your tuning and then set the SSF accordingly.

Bingo!

I know its tuned at 35hz and pretty sure it was used for burps by the previous owner.

Damn, using a 35 hz tuning just for burps????

I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion!

2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/

8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/

Link to comment
Share on other sites

I know its tuned at 35hz and pretty sure it was used for burps by the previous owner.

I think you got jipped. 35hZ tuning in a box for just burps is unrealistic with that equipment. Just set your SSF to ~30-32hZ and you should be fine depending on the signal you're throwing at it.

Need an install? Hit me up.
[email protected]


Got car audio questions? Check here first!
Everything you need to know. =]

http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 2222 Guests (See full list)

×
×
  • Create New...