A&W ROOTBEER Posted May 24, 2010 Report Share Posted May 24, 2010 (edited) hey guys the car is a cadillac cts, and im only doing 1 15'' fi q, do you guys think 100 sq ft is enough? 67' x 36'' 80mill thick? Edited May 24, 2010 by A&W ROOTBEER Quote Link to comment Share on other sites More sharing options...
basshead4life Posted May 24, 2010 Report Share Posted May 24, 2010 hey guys the car is a cadillac cts, and im only doing 1 15'' fi q, do you guys think 100 sq ft is enough? 67' x 36'' 80mill thick? 67' x 3' is 201 sq ft. and should be plenty Quote Team S.M.D. Maritime Car Audio- (2) 18" SSA ZCON D1 - American Bass 500.1 - 60 ft of 3/0 -480 Ah of battery - (2) stock alternators (70 +90) - Kenwood Excelon x-794, 4v preouts car audio is just a LOT more complicated than "this amp does this power" or "this sub will be this loud". its like 2 + 2 = banana. (if that confuses you then you get the point) lol Link to comment Share on other sites More sharing options...
sodfamily Posted May 24, 2010 Report Share Posted May 24, 2010 depends on what you classify whats enough. If it was me, then that would be enought for the trunk only. If you wanted to do the trunk, floor, roof and all the doors then no that would not be enough. Quote Head Unit: Alpine CDA 9887 Sub Amps: 4 RF2500's Subs: 8 SA-12's Walled Comp Amp: 1 RF600.2 (for now) Comps: (4) 6.5 Punch Mid Pros and 2 Punch Pro Tweeters Batteries: (1) XS D5100 (5) D3100 Power Cables: 2 runs of 2/0 power and ground each front to back(Try-Star) Alternator: Dual Mechman Rhino 250's Deadener: Fatmat / Damplifier Pro Link to comment Share on other sites More sharing options...
A&W ROOTBEER Posted May 24, 2010 Author Report Share Posted May 24, 2010 67' x 3' is 201 sq ft. and should be plenty ebay ad says 2 Rolls of 33.5' L X 18" W Quote Link to comment Share on other sites More sharing options...
SGTSKIP Posted May 24, 2010 Report Share Posted May 24, 2010 assuming the box is in the trunk.... use all of what you have in the trunk... the trunk lid for sure..... 1. Concentrate on the trunk. It is easier to get to, and as you add power and upgrage speakers you can add deadening as you go, as in the doors, floor headliner. Use what you have and add more as your budget allows. Steven Quote Does this smell funny to you? Its your sister Link to comment Share on other sites More sharing options...
Hotdog Posted May 24, 2010 Report Share Posted May 24, 2010 100sq/ft did my whole Mercury Mountaineer and that included a double layer of fat mat above the subs. Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
Maxim Posted May 24, 2010 Report Share Posted May 24, 2010 ebay ad says 2 Rolls of 33.5' L X 18" W If you have 2 rolls of 33.5" L x 18" W, then that's equal to one roll of EITHER: 33.5" L x 36" W OR 67" L x 18" W You would only double one dimension, not both. In your original post, you said it was 67" L x 36" Width, which would be 4 rolls, not 2. Anyway, a "Trunk Pack" of Damplifier Pro is equal to 20 square feet (probably enough to do the lid), so I'd say 100 square feet of this stuff should be good to do one full layer for your whole trunk. Quote wtf is lolcats? I'd def get a fat hooker if i had to resort to that kinda thing. I feel like they'd be grateful and work harder. Also its more bang for my buck, more real estate for my dollar if you catch my drift. its like the Costco of streetwalkers. I was hoping for 150 . I was hoping she would let me put it in her butt Link to comment Share on other sites More sharing options...
A&W ROOTBEER Posted May 24, 2010 Author Report Share Posted May 24, 2010 (edited) damplifier is way to expensive for me, im getting 100 sq ft eighty ml thick of rattle trap by fatmat for $160..it would cost me $260 from damplifier and its only 60ml thick Edited May 24, 2010 by A&W ROOTBEER Quote Link to comment Share on other sites More sharing options...
Maxim Posted May 24, 2010 Report Share Posted May 24, 2010 damplifier is way to expensive for me, im getting 100 sq ft eighty ml thick of rattle trap by fatmat for $160..it would cost me $260 from damplifier and its only 60ml thick LOL I wasn't saying get Damplifier, I was just using it as a reference. SecondSkin says 20 sq. feet of their stuff is good for a trunk lid, so 100 sq feet of anybody's stuff should be good for the whole trunk. Quote wtf is lolcats? I'd def get a fat hooker if i had to resort to that kinda thing. I feel like they'd be grateful and work harder. Also its more bang for my buck, more real estate for my dollar if you catch my drift. its like the Costco of streetwalkers. I was hoping for 150 . I was hoping she would let me put it in her butt Link to comment Share on other sites More sharing options...
OrionStang Posted May 24, 2010 Report Share Posted May 24, 2010 I used just over 100sq ft for just the trunk of my Mustang. Buy more than what you think you need. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.