Guest Posted June 11, 2010 Report Posted June 11, 2010 I previously had a Memphis 1000w Mojo 12", matched with a Memphis 1000w amp. I was always planning on replacing that system with a BTL, but just never did. It is now gone, and I have the money to buy a new one. When I have my local audio place setup a box for me, what should it be tuned at? Or should I just let them deal with it? So the BXI2610 Amp should be fine for the BTL Correct? as long as you have a GOOD electrical for that 2610 then yes it will be fine.
KAPONE.SS Posted June 11, 2010 Report Posted June 11, 2010 I had my BTL on a 2610 and the BTL just laughed at it and the SQ was S****Y. Once I got a AQ 3500 I saw how crappy the hifonics was. 96 IMPALA SS Pioneer DEH-P8600MP H/U Pioneer TS-C160R 6.5" Pioneer TS-D690R 6x9" JBL GTO755.6II Stinger spdh-10 cap 100sqft. Fatmat AQ 3500d 18" FI BTL 7cuft 35Hz
Carnag3 Posted June 11, 2010 Report Posted June 11, 2010 i have my BXI2610D running @ .4ohm full power and it dosnt even start to get warm or clip An amp that doesn't get warm, must have magic dust inside 2000 Blazer 4dr -24" Boss 330s -Lowered 2/3 -5000k Hids w Projector Retro -Candy tails -LED interior lighting -20% tint 35% windshield -Alpine 9886 HU -RF P1462 Dash -RF P1652 Front -RF P1652 Rear -Two 18" Fi BTLs -MB Quart Onyx 4.80 -Two Audioque AQ2200Ds -Xs Powerr D5100, 2 Powersafe G31s -Knukoncepts 1/0 wire -Mechman 270 Alt w Boost Module -10.4 Net @ 28hz 140sq.inch of port My Youtube Channel!!
fecupe2001 Posted June 12, 2010 Report Posted June 12, 2010 No, i don´t think the 2610 it´s enough for a BTL, i´m those kind of guys that think, better to have a big ass amp and set the gains right and clean, than clipping looking for more power, i would try at least 3K IMO... Kapone, are you really comparing a 2600 watts "cheap" amplifier with a 4300 watts stronger and more expensive amplifier? I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
cubs_fan0718 Posted June 12, 2010 Report Posted June 12, 2010 Anything that puts out good clean rated power @ 2000w rms or above should be fine. 06 Impala SSKenwood Excelon DDX593 Ampere Audio 150.4 Ampere Audio 5K1 XS D4700 (front)Mechman 320a Alt. w/ Big 3 Lots of Second Skin Damplifier Under Construction for 2017
boomin Posted June 12, 2010 Report Posted June 12, 2010 o with the AQ2200. its a bad ass amp with a clip indicator light so you don't send a clipped signal to the sub....that amps ideal cause you DO NOT want to clip such a expensive sub and screw it up F/s: 2 custom made boxes, for 1 12" and 2 12" hit me up I'll let em go cheap
Tek Posted June 12, 2010 Report Posted June 12, 2010 Kapone, are you really comparing a 2600 watts "cheap" amplifier with a 4300 watts stronger and more expensive amplifier? x2. I would really hope that an 3500W AQ amp would be better than a 2600W Hifonics amp.
KAPONE.SS Posted June 12, 2010 Report Posted June 12, 2010 x2. I would really hope that an 3500W AQ amp would be better than a 2600W Hifonics amp. What the F*** does wattage have to do with SQ. Absolutly nothing 96 IMPALA SS Pioneer DEH-P8600MP H/U Pioneer TS-C160R 6.5" Pioneer TS-D690R 6x9" JBL GTO755.6II Stinger spdh-10 cap 100sqft. Fatmat AQ 3500d 18" FI BTL 7cuft 35Hz
jjones91 Posted June 12, 2010 Report Posted June 12, 2010 I have my 18 inch BTL hooked to an AQ2200 and I love it, after awhile I plan on getting the 3500 but you can't go wrong with AudioQue amps. THIS THREAD IS GOING TO BE SO EPIC....i cant wait ill leave and check it tomorrow when someone is crying, someone else is banned and thread is locked... :insert pic of dane cook laughing: Mechman 270 amp alt. Pioneer DEH-P7200 Powerbass 2XL 5.25 Coax's Powerbass 2XL 6.5 Comp's Powerbass 2XL 6x9's Powerbass asa400.4 AQ2200 Custom 18 with BTL motor Trunked with no matting FTTTLLLLLL!!!
89 Chevy Posted June 14, 2010 Author Report Posted June 14, 2010 I have my 18 inch BTL hooked to an AQ2200 and I love it, after awhile I plan on getting the 3500 but you can't go wrong with AudioQue amps. So do I buy the Hifonics BXI2610D or the AQ2200 Amp?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.