How can I tighten the chrome panel?

[GymJunkie]

As I mentioned before thats the part that rattles, I found out its quite loose, I cant find anything on google (maybe typing in the wrong things), are there some bolts deep in the trunk or is there something else that needs to be done?

[MarioB]

As I mentioned before thats the part that rattles, I found out its quite loose, I cant find anything on google (maybe typing in the wrong things), are there some bolts deep in the trunk or is there something else that needs to be done?

What chrome panel

[GymJunkie]

What chrome panel

Sorry, Im used to chatting on a much smaller forum. this one

[GymJunkie]

?

[flashlight_65]

You can't really. BUT you can put strips of weather stripping on the chrome piece to keep it from chattering. I have a '93 fleetwood and had the same problem. Now my biggest problem is finding parts for it.

[GymJunkie]

You can't really. BUT you can put strips of weather stripping on the chrome piece to keep it from chattering. I have a '93 fleetwood and had the same problem. Now my biggest problem is finding parts for it.

Tell me about it, Ive been wanting to get my door fixed for months.

That sucks I cant tighten it in any way cause I can actually move the piece its so loose

[flashlight_65]

Tell me about it, Ive been wanting to get my door fixed for months.

That sucks I cant tighten it in any way cause I can actually move the piece its so loose

Take some more pics of the door where it's loose

[310_cutty]

I thinks these moldings are held with clips, maybe one of them broke?

If you can take them off I think if you add some 3M double sided tape (its thick)on the inside it might help some...

[79 cutty]

More than likely one or more of the plastic clips holding it on have busted. They are harder to find now days, but give the dealership a call and they can order them for you. Chances are very good you will break the current ones taking the chrome rocker panel off, so you will need to order enough to replace all of them, and in that back part I believe there is 4 of them.

[kingkon]

if you remove the molding on the top part of the rocker panel you can add some screws into the quarter panel then put the molding back on. on the bottom you can also add some screws to hold it tight onto the quarter panel.