Maticus Posted September 26, 2010 Report Share Posted September 26, 2010 I plan on giving two of these guys 800RMS of power, so 400 a piece, would .6 cubes a driver be good at this power? Only person I'd even think to know would be Rob or Rusty at this point in time though. Any feedback is appreciated. Quote Link to comment Share on other sites More sharing options...
corona_jeff Posted September 26, 2010 Report Share Posted September 26, 2010 I think it would be safe to say make it closer to the .8 cu ea Quote Link to comment Share on other sites More sharing options...
Hotdog Posted September 26, 2010 Report Share Posted September 26, 2010 This was in the other Thread Mounting Depth: 5.25" Mounting hole diameter: 7.25" Motor Width: 6.5" Weight: 17.5lbs VC Diameter: 2" Displacement: .10³ ft Magnet Weight: 15lbs Power Handling RMS/Peak: 300/600 Impedance (Ohm): d2 or d4 Suggested Sealed: .5³ ft Suggested Ported: .8³ ft Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
Maticus Posted September 26, 2010 Author Report Share Posted September 26, 2010 This was in the other Thread Mounting Depth: 5.25" Mounting hole diameter: 7.25" Motor Width: 6.5" Weight: 17.5lbs VC Diameter: 2" Displacement: .10³ ft Magnet Weight: 15lbs Power Handling RMS/Peak: 300/600 Impedance (Ohm): d2 or d4 Suggested Sealed: .5³ ft Suggested Ported: .8³ ft I saw this, and knew i was gonna give it a tad more power, 33% more than rated, so i figured the box could be a bit smaller to do be safe. maybe even just a .1 cube lower than stated. Quote Link to comment Share on other sites More sharing options...
WCA Rusty Posted September 26, 2010 Report Share Posted September 26, 2010 Through them in .8 each and if needed you can always shrik the box a tad if needed. heres 300 watts in a .9 box with a 4 inch port Quote DC AUDIO Phone Number 1(855)SPL-DBZZ Built by Competitors, for Competitors. Link to comment Share on other sites More sharing options...
alaskanbass Posted September 27, 2010 Report Share Posted September 27, 2010 (edited) how much for 2 shipped to wasilla alaska 99654 Edited September 27, 2010 by alaskanbass Quote clarion cz500 head unit Kinetik hc600 2 level 3 15s in a 4th order mb quart 1500.1 (for now untill i get a dc 1.2k) all knu konceptz wiring in a 2009 ford flex -DISKOLORED AUDIO- -Authorized Dealer for DC Soundlab in Alaska- Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.