Jump to content
Sonic Electronix

Recommended Posts

Posted

You know were all a bunch pic and vid whores...lol

www.dcsoundlab.comDCforum.jpgyoutube video's kbsmoker2011 MECAOH AS3 Champ 147.5OH DB2 Champ 125.9WF AS3 3rd 147.3WF DB3 2nd 128.3

SystemPioneer AVH-P4300DVD2 sets Fusion Encounter 6.5 componentson Crunch Ground Pounder 1200.418" DC NEO

on DC 5.0KKnukonceptz 1/0 through outBig 3 all 1/0XS D6500under hood D3100 in the backMechman 270....rebuilt by Ohio Generator :)

Posted

You know what skittles. Screw all you guys with SUVs and trucks doing 40s with nothing!!!! Lol.

It is actually not hard at all to get loud out of a trunk.

You wall at the trunk opening, strip your rear deck / completely seal it, seal any passages to the trunk with e-foam, and use more port than you think you need.

And by port I mean AERO PORT mwaahahaha

Posted

It is actually not hard at all to get loud out of a trunk.

You wall at the trunk opening, strip your rear deck / completely seal it, seal any passages to the trunk with e-foam, and use more port than you think you need.

And by port I mean AERO PORT mwaahahaha

Trunks are actually difficult to get loud...They take a ton of work

Team MaxRetribution

Si Vis Pacem Parabellum
Id rather be judged by 12 than carried by 6

Bowhunting- Life Begins and Ends at Full Draw

Bowhunting Team Fatal Trajectory Hunt Team

 

http://www.stevemeadedesigns.com/board/topic/49335-sick96vtecaccords-t-line-build/?hl=sick96vtecaccord << Accord Build

http://www.stevemeadedesigns.com/board/topic/68498-smokedout08impalas-tline-build/?hl=+sick96vtecaccord << Impala T-line build

 

Rebassed.com for all your music needs 👌

Posted

Did that. Got port noise and only 135deebeez. Lol. Didn't use enough port though.......I failed now trying to rebuild.

Port and sub facing in without the seal is the worst possible configuration for cancellation. So the first thing to do is make sure that your trunk doesn't rattle AT ALL when the bass is playing (even at higher pressure levels.)

As for the port area, most people use far too little when using aeros for some reason.

Instead of using the 12-16 sq. inches of port per cube rule. You should base you're required area off the peak to peak linear excursion of the driver and the total cone area. That is the volume of air the woofer displaces during a cycle.

Also the lower you tune the less area you need due to decreased cone velocity and thus a lower volume of air trying to evacuate the port when the diaphragm moves..

Posted

Trunks are actually difficult to get loud...They take a ton of work

Seriously if you know how to do trunks you can get loud on low ass power.

Usually with a trunk wall the "car sealed" dynamics aren't that great, but when you open the windows you should be able pound high 40's without too much trouble.

Posted

You know what skittles. Screw all you guys with SUVs and trucks doing 40s with nothing!!!! Lol.

:pardon:

:rofl:

:drinks:

If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood.

Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s.

http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/

Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build

Yeah. im pretty sure they dont warranty retarded people.

Posted

A newbie that knows a thing or two... Nice...

:werd_msword: i like this guy already.

If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood.

Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s.

http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/

Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build

Yeah. im pretty sure they dont warranty retarded people.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 3657 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...