SQMonte Posted January 2, 2011 Report Share Posted January 2, 2011 first strip the carpet out of there. Then where the trunk meets the cabin, I think there should be some bolts that hold on those diagonal pieces so you can remove them, thus making the hole bigger. At least its like that in my car. I wish mine was like that:angry: I'd probably have some 15's forward facing back there Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
n8ball2013 Posted January 2, 2011 Report Share Posted January 2, 2011 first strip the carpet out of there. Then where the trunk meets the cabin, I think there should be some bolts that hold on those diagonal pieces so you can remove them, thus making the hole bigger. At least its like that in my car. I wish mine was like that:angry: I'd probably have some 15's forward facing back there get a sawzall you can do it I had the same type of thing with my cavalier a long time ago. couple cuts later and we were all set. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
craniumcrackinbassv2 Posted January 2, 2011 Author Report Share Posted January 2, 2011 the only problem i have is those angled pillers where the seats fold down and that bar where those yellow straps are is only 15'' tall. Now i stripped the carpet about 5 minutes before these pics and i found out that the gas tank has a cord running from the top and it has a sensor right next to it, idk if stripping the floor carpet is a very good idea lol. tell me if you seed a pic of that as well to get a better idea of what im talking about. Quote Link to comment Share on other sites More sharing options...
craniumcrackinbassv2 Posted January 2, 2011 Author Report Share Posted January 2, 2011 im going to strip it and send a pic Quote Link to comment Share on other sites More sharing options...
SQMonte Posted January 2, 2011 Report Share Posted January 2, 2011 first strip the carpet out of there. Then where the trunk meets the cabin, I think there should be some bolts that hold on those diagonal pieces so you can remove them, thus making the hole bigger. At least its like that in my car. I wish mine was like that:angry: I'd probably have some 15's forward facing back there get a sawzall you can do it I had the same type of thing with my cavalier a long time ago. couple cuts later and we were all set. If my DD 2512's don't work out, that's the next step8) Quote Alpine CDA-117...Memphis 16-X03 CDT Audio SQA-4100...SEAS Prestige H1396...Crescendo MP-6 Soundstream Rubicon 1.2500d...Digital Designs 3512f Link to comment Share on other sites More sharing options...
craniumcrackinbassv2 Posted January 3, 2011 Author Report Share Posted January 3, 2011 ok i removed the carpet where the seats fold down, and yes it seems like i can remove them with just a few screws but im not sure if that piece of metal is some type of structural integrity or what....later on ill remove the carpet thats on the side of the trunk. Quote Link to comment Share on other sites More sharing options...
craniumcrackinbassv2 Posted January 3, 2011 Author Report Share Posted January 3, 2011 ok i removed the carpet where the seats fold down, and yes it seems like i can remove them with just a few screws but im not sure if that piece of metal is some type of structural integrity or what....later on ill remove the carpet thats on the side of the trunk. thats my gfs dog btw... Quote Link to comment Share on other sites More sharing options...
fecupe2001 Posted January 3, 2011 Report Share Posted January 3, 2011 I can asure you this is not meant for SPL comps, it´s a loud ass trunk car!!! I´m with N8 on this one, this car was the same exact thing, we fired back and it was way louder than this, then, we sealed everything and that car came alive!!! Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
bobonit Posted January 3, 2011 Report Share Posted January 3, 2011 Take one of these, Then you can go from this, To this, Quote 97 Maxima SE Bunch of shit going in, check out the build Build Log Link to comment Share on other sites More sharing options...
Socky Posted January 3, 2011 Report Share Posted January 3, 2011 Take one of these, Then you can go from this, To this, Damn you can fit a big box back there now Quote Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.