Joseph Chambers

Too bad West Coast Customs had a very bad reputation of doing shitty work, and look up Trish Paytas's Mercedes Benz G550 https://www.yelp.com/biz/west-coast-customs-burbank?start=20

yea, it sucks because Steve doesn't keep his website in stock.. I sometimes feel as if he doesn't have his inventory in sync.

Good time to upsell Second Skin Damplifier Butyl Rope

when will the volt meter option be available?

i have the sq 90.4 and it should do you well.

#fml this is porn haha

Have you ever metered these or the tahoe since the new smd v2s?

My goal is to not have step-downs. :/ Though I want to get more power for my system. So 14v is a happy medium. I have a few questions: Can I keep my 12v D6500 in the front and add 14V D1400 to the back or would I need to start over with all 14v? Would it be possible to have the 12v in the front with x2 14 in a battery bank with the XS Power 14V AGM IntelliCharger which I can just leave in the back with the batteries connected between the battery bank and from the front? The D6500 has these specs: MAX Amps – 3,900A CA – 1070 Ah – 75 The D1400 has: Max Amps – 2,400A CA – 675A Ah – 50 So x2 D1400s would give me a bit more "storage" from what I understand but I dont understand the difference between CA and Max Amps? Thanks!

If I were to buy the woofers alone from the XSP5KIT can I connect them to an existing nvx crossover without messing up the crossover?

Hello, I have three things to say here: http://www.sonicelectronix.com/item_68827_NVX-XSP5KIT.html when adding the cross-sells/bundled savings the coupon code does not work. NVX25OFF for example, to get the free sound deadener. It seems to only work when I use the: "add to cart w/ coupon" CTA. Even if I were to add the kit without the bundled savings and add NVX25OFF in my cart individually it does not work. My next question is this. I'm debating between a few scenarios right now. Buy just this: http://www.sonicelectronix.com/item_68823_NVX-XSP525.html for the rear doors as fillers. Please note I have x2 kits of the XSP6KIT in my front stage. Buy http://www.sonicelectronix.com/item_68827_NVX-XSP5KIT.html http://www.sonicelectronix.com/item_72200_NVX-VSP525KIT.html http://www.sonicelectronix.com/item_72199_NVX-VSP525.html What should I do? Again I just want to fill the rear seats.

You can do the hood and add heatwave pro on top of that! That cover i would say no.

Happy for you. I'm sure we will get a video so I will wait for that!

do it!

I see now. Under tools & accessories you do see it but when you click on products on the top http://store.secondskinaudio.com/brands/Second-Skin-Audio.html?sort=priceasc its not there. Though logically I can see why. is this made with the same butyl rubber as your sound deadener and not Speaker Sealing Caulk like on parts express?

Just food for thought: I went to your website to look for this product. I clicked on products tab to open that: http://store.secondskinaudio.com/brands/second-skin-audio and i clicked low to high. Couldnt find this. I had to come here to find the link because i can't find it on your website. :/

yup, me too!

Yes. The mids and highs will be pushing full output! I don't know if running 6 on a 4 channel amp is a great idea but this is how i think it will be wired: x3 pairs: http://www.sonicelectronix.com/item_68822_NVX-XSPTW.html running on this: http://www.soundqubed.com/Q4-90_p_252.html x1 http://www.sonicelectronix.com/item_68824_NVX-XSP65.html & x2 http://www.sonicelectronix.com/item_68824_NVX-XSP65.html running on this: http://www.soundqubed.com/Q4-90_p_252.html x2 http://www.soundqubed.com/HDC3110-Copper-Coil-Subwoofer_p_13.html x1 http://www.soundqubed.com/Q1-22002-Amplifier_p_31.html So I should really have x3 output meters than? Now Im thinking of where I need to put these.

I don't know how many of what should I buy. I have 1 SMD-OM-1 and this is what Im working with as far as amps: x2 Soundqubed Q4-90 Soundqubed Q1-2200.2 I was thinking: x3 SMD-OM-1 x1 SMD-VM-1 Now the Q4-90 will separately run the mids and highs.. so one amp will run mids and another will run highs. How if they are outputting the same power for clipping.. could I do with just assuming that my highs are not clipping and -1 SMD-OM-1 or run x2 Soundqubed Q4-90 on 1 SMD-OM-1?

This is my jeep: I have everything for the build ( see my sig ) but I just want to buy some of your luxury liner pro and overkill pro.. I want to do everything at once. I've liked your page on FB..

Hello, I'm on the fence to add two XS Power XP2000 in the back with a XS Power D6500 up front. I already ordered the D6500. My question is this: if I have a 240a HO with the XS Power D6500 and the two potential XP2000 in the back.. would I need to separately charge the rear batteries or would the current electrical handle it fine? Im guessing I should have two runs from the front -> back battery bank?

Thanks for replying! I bought a pair of these from a guy on Facebook for 32 bucks. The issue I have is that I live in Mexico so while most hardware stores in the states have this stuff I need to make sure I get everything I can when I cross. It costs me 100 bucks just to travel back and forth.. :/ so.. I will make sure I just stop by home depot

Hello, I just bought the xs power D6500 and they said: it doesn’t come with regular battery terminals just the screws for ring terminals. However I have I don't need anything else? I also have a pair of 6x1/0 battery terminals which I plan on using.. but to put it into the car I won't need anything else?

sweet. like a huge upgrade? ex: migrating to XenForo or sticking to IP Board with just a version upgrade?

to the forum itself or you're gonna add the plugin?

Hello, I was trying to format my signature a little differently than everyone else and decided to try and add tr.td's but 1) you're not version 4.* for IP.Board or 2) you don't have this: https://community.invisionpower.com/files/file/7476-table-bbcode/? [table] [tr] [td]1[/td] [td]2[/td] [/tr] [tr] [td]1[/td] [td]2[/td] [/tr] [/table] could you please add that.