Joseph Chambers

Too bad West Coast Customs had a very bad reputation of doing shitty work, and look up Trish Paytas's Mercedes Benz G550 https://www.yelp.com/biz/west-coast-customs-burbank?start=20

yea, it sucks because Steve doesn't keep his website in stock.. I sometimes feel as if he doesn't have his inventory in sync.

Good time to upsell Second Skin Damplifier Butyl Rope

when will the volt meter option be available?

i have the sq 90.4 and it should do you well.

#fml this is porn haha

Have you ever metered these or the tahoe since the new smd v2s?

My goal is to not have step-downs. :/ Though I want to get more power for my system. So 14v is a happy medium. I have a few questions: Can I keep my 12v D6500 in the front and add 14V D1400 to the back or would I need to start over with all 14v? Would it be possible to have the 12v in the front with x2 14 in a battery bank with the XS Power 14V AGM IntelliCharger which I can just leave in the back with the batteries connected between the battery bank and from the front? The D6500 has these specs: MAX Amps – 3,900A CA – 1070 Ah – 75 The D1400 has: Max Amps – 2,400A CA – 675A Ah – 50 So x2 D1400s would give me a bit more "storage" from what I understand but I dont understand the difference between CA and Max Amps? Thanks!

If I were to buy the woofers alone from the XSP5KIT can I connect them to an existing nvx crossover without messing up the crossover?

Hello, I have three things to say here: http://www.sonicelectronix.com/item_68827_NVX-XSP5KIT.html when adding the cross-sells/bundled savings the coupon code does not work. NVX25OFF for example, to get the free sound deadener. It seems to only work when I use the: "add to cart w/ coupon" CTA. Even if I were to add the kit without the bundled savings and add NVX25OFF in my cart individually it does not work. My next question is this. I'm debating between a few scenarios right now. Buy just this: http://www.sonicelectronix.com/item_68823_NVX-XSP525.html for the rear doors as fillers. Please note I have x2 kits of the XSP6KIT in my front stage. Buy http://www.sonicelectronix.com/item_68827_NVX-XSP5KIT.html http://www.sonicelectronix.com/item_72200_NVX-VSP525KIT.html http://www.sonicelectronix.com/item_72199_NVX-VSP525.html What should I do? Again I just want to fill the rear seats.

You can do the hood and add heatwave pro on top of that! That cover i would say no.

Happy for you. I'm sure we will get a video so I will wait for that!

do it!

I see now. Under tools & accessories you do see it but when you click on products on the top http://store.secondskinaudio.com/brands/Second-Skin-Audio.html?sort=priceasc its not there. Though logically I can see why. is this made with the same butyl rubber as your sound deadener and not Speaker Sealing Caulk like on parts express?

Just food for thought: I went to your website to look for this product. I clicked on products tab to open that: http://store.secondskinaudio.com/brands/second-skin-audio and i clicked low to high. Couldnt find this. I had to come here to find the link because i can't find it on your website. :/

i recently ordered skyhigh sound deadener - one mega pack and another trunk kit. Thats well over 115 pounds for sure. haha. They delivered that first thing in the morning when normally shit gets delivered after 5pm. haha. Now its sitting at the hotel until I drive 4 hours to go pick it up. ( I live in Mexico and deliver shit to a hotel because they hold it for me )

yup, me too!

Yes. The mids and highs will be pushing full output! I don't know if running 6 on a 4 channel amp is a great idea but this is how i think it will be wired: x3 pairs: http://www.sonicelectronix.com/item_68822_NVX-XSPTW.html running on this: http://www.soundqubed.com/Q4-90_p_252.html x1 http://www.sonicelectronix.com/item_68824_NVX-XSP65.html & x2 http://www.sonicelectronix.com/item_68824_NVX-XSP65.html running on this: http://www.soundqubed.com/Q4-90_p_252.html x2 http://www.soundqubed.com/HDC3110-Copper-Coil-Subwoofer_p_13.html x1 http://www.soundqubed.com/Q1-22002-Amplifier_p_31.html So I should really have x3 output meters than? Now Im thinking of where I need to put these.

I don't know how many of what should I buy. I have 1 SMD-OM-1 and this is what Im working with as far as amps: x2 Soundqubed Q4-90 Soundqubed Q1-2200.2 I was thinking: x3 SMD-OM-1 x1 SMD-VM-1 Now the Q4-90 will separately run the mids and highs.. so one amp will run mids and another will run highs. How if they are outputting the same power for clipping.. could I do with just assuming that my highs are not clipping and -1 SMD-OM-1 or run x2 Soundqubed Q4-90 on 1 SMD-OM-1?

This is my jeep: I have everything for the build ( see my sig ) but I just want to buy some of your luxury liner pro and overkill pro.. I want to do everything at once. I've liked your page on FB..

Hello, I'm on the fence to add two XS Power XP2000 in the back with a XS Power D6500 up front. I already ordered the D6500. My question is this: if I have a 240a HO with the XS Power D6500 and the two potential XP2000 in the back.. would I need to separately charge the rear batteries or would the current electrical handle it fine? Im guessing I should have two runs from the front -> back battery bank?

Thanks for replying! I bought a pair of these from a guy on Facebook for 32 bucks. The issue I have is that I live in Mexico so while most hardware stores in the states have this stuff I need to make sure I get everything I can when I cross. It costs me 100 bucks just to travel back and forth.. :/ so.. I will make sure I just stop by home depot

Hello, I just bought the xs power D6500 and they said: it doesn’t come with regular battery terminals just the screws for ring terminals. However I have I don't need anything else? I also have a pair of 6x1/0 battery terminals which I plan on using.. but to put it into the car I won't need anything else?

sweet. like a huge upgrade? ex: migrating to XenForo or sticking to IP Board with just a version upgrade?

well one of the things I kind of wanted to do was have a underbody flash when the alarm was going off. So besides screaming: "hey get away from me" with the alarm.. the lights would blink blue, red or both together. also I wanted to do something like this on the lights.. but it can change colors. Im looking at the links you sent me too.