skittlesRgood

itll look like this bolt, ring terminal, washer, box, washer, nut, washer, ring terminal, washer, nut. edit, use two nuts so you dont have to reach inside the box if you ever want to change wiring or something.

copper or brass, if you can find it. but it wont make much difference what you use.

tip top

no... you have to actually connect all the wires together, just like the picture. you have one + and one - on each speaker that isnt connected. the speaker wont even play like that.

good deal.

top

if i were you, i would only find where your volume should be on the 0db tone. dont touch your gains. if you tune with a 0db tone and change your gains you will hear a serious drop in output during music.

no need, its a 0db tone on the dbdrag cd

sounds like clipping. did you tune with a 0db tone? if you tuned with a -3db tone, for example, the volume number where you clip will be lower with the 0db tracks on the CD

yes, inside the box. like i said, the same thing happened to my midbass. i treated the back wall to eliminate the back wave and it went away. just give it a shot. wont cost you anything.

i had a mid do that before. i believe that happens because of the back wave. try putting some cones or egg cartons on the wall behind the sub and see if it goes away. at least to test it.

my fault, i just looked them up and im pretty sure those are sold individually. $30 for a pair of speakers wouldnt want to be anything you would want to touch lol.

sold as pairs. they will always be sold in pairs unless they say its a single speaker. no one sells a single mid and tweet.

lol

ohm's law. its not just a good idea. its the law.

bump

150.4, two 12"s, 3k. 38hz, sealed/dash.I had to play too. lol

honestly, you dont. I had mine on a 12k in a 5 cube box. these guys handled it without a problem. that 3500 will get them moving pretty good but its really not a danger zone for these subs. depends on the user obviously, I know i wouldnt have a problem doing it.

no extras spiders. id really rather get both traded at once but obviously if we can find another single to trade i would be happy splitting them up.

bump

bump

bump

same here. i could have spent a little more but so far all the games i have tried have ran on full settings without a problem. i couldnt imagine spending 1400 after what i got for $500

only judges that I know of on this site are kimo and alpine. you can PM them here or get their contact info at teambassick.com. they should have an email address there.

ya, you did a great job building it. its kind of funny how some of the loudest guys just slap shit together and lack real craftsmanship and the guys with great craftsmanship dont know how to get loud. sorry it was a waste of time. next time come on here and post your plans. tell us what you want out of the box. we can help you out.