I just purchased a refurbished SAE-1200D off of DB-r Electronics and it seems there might be a problem. (I ordered a v.1 but they sent me a v.2 (which is fine, better actually lol))
First thing I noticed after opening the box was that it sounded like a bunch of little pieces of something rattling inside of the amplifier. I shook it a little to see if I can get some of it to fall out to see what it was and a bunch of little pieces of what looked like dried hot glue were falling out of it. I already had my truck wired up for it so I put it in to test to see if it was still functional, and it seems to be putting out maybe half the power it should.
I had my sub wired to 4 ohms to a "Boss 800W Max Amp" and it seems to maybe only get a little louder with the sub wired to 1 ohm to this amp. My question is whether I should call up Db-r and ask about them taking a look at it or maybe I might of messed up with the wiring and there are some things I should check out before I do that? I have it wired with 4awg wire to the batt and the frame of my mountaineer, with a 150A fuse at the batt. Maybe I'll try a different ground mounting point?
It's stock electrical, but it doesn't seem like it's being strained, my headlights aren't dimming at all or anything. Sub level on my HU is 15/15 on an Alpine CDA 105.
Sub is a TC Sounds Epic 10" Dual 2Ohm, voice coils wired in parallel, in a 2cu.ft. box. This amp should be able to rock this subs world.