Jump to content

extremeauto

Members
  • Posts

    484
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by extremeauto

  1. mine is wierd i have 40" wheel well 2 wheel well ...31" tall at hatch 36"@the back seat and can go 52" wide if i clear my wheel wells that are @6" tall i have a box designed now for my 2 Fi bl 18"s ....its gonna be 31"tall,40"wide22.5 deep and have a 10"x16" port tuned @31.46 hz
  2. it might have a factory amp i have done a few Taurus's (as far as mechanics go i am the Taurus king i have been told...lol) what i usually do that is easiest is just run my own speaker wire. you can go thro the factory door looms but its a b**ch. only way to get it to work is to hook up the factory radio and get a test light and go on each wire to see if it has power cut any wire that does and rewire each time and when u get no sound but everything works on the radio i would say u have the factory remote wire...then u wire that to ur head unit remote wire and you should be in business...this way works i could never find a good wiring diagram of the Taurus radio ....hope this helps
  3. i don't know about him but my daughter is 2 1/2 and has over $450.00 in the bank we deposit all our change and any cash or checks she gets into that account have been since she was born....she should have nice car as well when she is 16 we also pay into collage fund but i have no clue what is in there ....lol it will teach her how to save for things i hope ....thats my 2cents...
  4. i make sooooo much money off GM intakes what is the main cause of this is the dex-cool coolant used by GM .it after time will turn very acidy and eat the plastic in the cooling system. the way to fix this issue permanently is to get the *fel pro gaskets* lower intake set that's is metal instead of the plastic (its referred to as the problem solver kit) then instead of using dex cool flush your cooling system with water till it comes out clean.(i use a garden hose& air hose to blow the heater core,rad,and heads out be careful not use to much pressure ) put it back togther run with water and clean oil dump oil and water.re fill with all makes all models anti-freeze and fresh oil with filter....i would do this on the new engine and never have a issue again...like i said i do ALOT of lower intakes on GM's & make sure to get all gasket areas lookin new b4 re Assembly ....good luck
  5. its a brz so it should do its rated power so if you trade ur getting screwed @ 1ohm out of 200 watts...but if the RF gives you 100 more watts @2ohm its a tough call.RF i think cost more.but the hifonics amps do sound really clean...i love hifonics amps personally so im gonna say keep the hifonics
  6. you will want a 200 rms you dont usually have to worry about peak power on amps as far as the sub goes i wouldn't feed it more than 500 watts myself
  7. i would but it wouldn't sound good im tune @28hz for the lows....lol
  8. be close to $250 per woofer for sundown but very much worth it i have had the sa-12"S and my buddy has sa 15"S and both got down..i had @1800rms to my sundown 12"S and he is giving his 15"s @3k daily and they dont even stink after long play time.. great subs and they dont ever seem to get loose or sloppy ...i would look into the sundowns if i was you... and you will have a hard time getting any 15" that's good for $250.00 a pair...
  9. i have had this issue with a couple of hifonics amps and what i have found is they do not like low voltage to the rca's .....after a while some headunits and sond processors get warm and lose out put voltage (mostly head-units my audio control does as well )if you have it ran thro the audio control un-hook it and use the line drive i got a soundstream bx-15 bass machine and have not had the issue since....anther thing with them is they will fade in and out like ur dropping a voice coil if you have them turned down 2 low.... im not sure if this is the same with the colosus but i know the bxi,brz and hifi all have had those issues test the rca voltage while it is doing it best way would be to get a spliter/Y rca and hook in @ the amp test the out put with a digy volt meter.
  10. it probably sense's when there is no power draw and shuts off after a few secs...i have a digy fuse holder at my rear bats and it turns on when it sense's a draw and shuts off when it stops dropping...kind of suck when u wanna see ur voltage when ur not rockin out...lol i would say for $5 you didnt get hurt...lol
  11. already faved this video on youtube so i can try to do mine right thanks for posting Brian
  12. if ur still looking i have a brand new never used only fondled power acoustic B.A.M.F 4k(it will only do 1600-2200watts) bought it new from sonic for $200 &found a hifonics for cheap local b4 ups got here with it never used it... i want $150.00+ shipping frm 61462 i have it posted on here as well send me a pm if interested
  13. yea if there nothing holding you and this is a long term gig i would jump on it as well if i was u then
  14. dont park to close to ppl but to far away from everything that no1 will see ur truck get messed with.alarm,alarm & 2wayalarm...lol and i wouldn't flaunt it as well ppl hate and done stupid stuff.and honestly something is gonna happen to this truck if you drive it daily ..whether it be a door ding or wreck or u screwed the wrong girl...lol just make sure to keep full coverage inc on it..then if some1 does something u get it fixed and new stuff...very nice truck btw
  15. is the $1 a hour worth whatever benefits you get? & how long is the new job gonna be around?
  16. junk yard or dealer will have them ...napa some times gets odd stuff if you ask
  17. try http://car-part.com or carquest if you have 1 near you .....i looked on car-parts com but there pretty pricey in you area for a used engine if you want new your gonna heve to spend closer to $2500.00 there are some with less than 100k mile but there in my area and shipping would be high as F**K.. good luck hope this helps
  18. huh! never knew that im gonna have to try that some time....will it work to get ride of the dreaded cop car noise?(the engine whine in the speakers)and what are the advantage's of doin this? and thanks 4 explaining
  19. noob question..lol how do 1 ground RCa's and why ? not being a smart ass i really have no clue & have never heard of this
  20. Power Acoustik's BAMF amplifier series is the perfect amplifier for those that are looking for quality performance, while wanting to save some cash. Each amplifier in the BAMF series feature a die-cast aluminum heat sink that dissipates heat from three sides of the amplifier. For convenience, all the connections and control functions can be found on one side of the amplifier. 4000W Max Monoblock Class D Amplifier Car Amplifier RMS Power Rating: 4 ohms: 1200 watts x 1 chan. 2 ohms: 1700 watts x 1 chan. 1 ohm: 2200 watts x 1 chan. Max power output: 4000 watts x 1 chan. Fully regulated PWM power supply Wired remote bass level control included System distress indicator Four way protection circuit Adjustable Tuned Bass EQ (0-18 dB Bass Boost) Hi-Speed digital circuitry Full selectable crossover (HI,Full,Low 1-Ohm Stable Full selectable crossover (HI,Full,Low) Die-cast aluminum heat sink designed for massive heat dissipation from three sides of the amplifier Heavy duty aluminum alloy heatsink or High-density split-dome convection heat sink for extreme heat dissipation Platinum-plated RCA level inputs Platinum-plated screw terminals Variable low-pass filter (40-200 Hz, 24 dB/octave) Variable subsonic filter (20-50 Hz) Variable subwoofer EQ @ 45 Hz Frequency response: 20-200 Hz Signal to Noise Ratio: 100 dB Dimensions: 13-3/4"L x 8-1/4"W x 2-1/8"H 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier. Authorized Internet Dealer
  21. you will need some battery's to take the strain of the alt but you want to have enough batt power to run the amp/amps you are running ....its gonna need all the power you can feed it
  22. apparently paypal takes a percentage unless u do a personal money transfer (shouldn't be more than 10%....im not 100% there will be fee's )just didn't want any surprise's ....
×
×
  • Create New...