extremeauto

i would but it wouldn't sound good im tune @28hz for the lows....lol

put a well in there or like dude said x2 15"s

be close to $250 per woofer for sundown but very much worth it i have had the sa-12"S and my buddy has sa 15"S and both got down..i had @1800rms to my sundown 12"S and he is giving his 15"s @3k daily and they dont even stink after long play time.. great subs and they dont ever seem to get loose or sloppy ...i would look into the sundowns if i was you... and you will have a hard time getting any 15" that's good for $250.00 a pair...

i have had this issue with a couple of hifonics amps and what i have found is they do not like low voltage to the rca's .....after a while some headunits and sond processors get warm and lose out put voltage (mostly head-units my audio control does as well )if you have it ran thro the audio control un-hook it and use the line drive i got a soundstream bx-15 bass machine and have not had the issue since....anther thing with them is they will fade in and out like ur dropping a voice coil if you have them turned down 2 low.... im not sure if this is the same with the colosus but i know the bxi,brz and hifi all have had those issues test the rca voltage while it is doing it best way would be to get a spliter/Y rca and hook in @ the amp test the out put with a digy volt meter.

it probably sense's when there is no power draw and shuts off after a few secs...i have a digy fuse holder at my rear bats and it turns on when it sense's a draw and shuts off when it stops dropping...kind of suck when u wanna see ur voltage when ur not rockin out...lol i would say for $5 you didnt get hurt...lol

already faved this video on youtube so i can try to do mine right thanks for posting Brian

if ur still looking i have a brand new never used only fondled power acoustic B.A.M.F 4k(it will only do 1600-2200watts) bought it new from sonic for $200 &found a hifonics for cheap local b4 ups got here with it never used it... i want $150.00+ shipping frm 61462 i have it posted on here as well send me a pm if interested

**BUMP** need this thing gone so i can start my wall soon!

yea if there nothing holding you and this is a long term gig i would jump on it as well if i was u then

dont park to close to ppl but to far away from everything that no1 will see ur truck get messed with.alarm,alarm & 2wayalarm...lol and i wouldn't flaunt it as well ppl hate and done stupid stuff.and honestly something is gonna happen to this truck if you drive it daily ..whether it be a door ding or wreck or u screwed the wrong girl...lol just make sure to keep full coverage inc on it..then if some1 does something u get it fixed and new stuff...very nice truck btw

is the $1 a hour worth whatever benefits you get? & how long is the new job gonna be around?

junk yard or dealer will have them ...napa some times gets odd stuff if you ask

try http://car-part.com or carquest if you have 1 near you .....i looked on car-parts com but there pretty pricey in you area for a used engine if you want new your gonna heve to spend closer to $2500.00 there are some with less than 100k mile but there in my area and shipping would be high as F**K.. good luck hope this helps

at least he thinks ur cool enough to steal ur stuff...lmao and lame

huh! never knew that im gonna have to try that some time....will it work to get ride of the dreaded cop car noise?(the engine whine in the speakers)and what are the advantage's of doin this? and thanks 4 explaining

noob question..lol how do 1 ground RCa's and why ? not being a smart ass i really have no clue & have never heard of this

Power Acoustik's BAMF amplifier series is the perfect amplifier for those that are looking for quality performance, while wanting to save some cash. Each amplifier in the BAMF series feature a die-cast aluminum heat sink that dissipates heat from three sides of the amplifier. For convenience, all the connections and control functions can be found on one side of the amplifier. 4000W Max Monoblock Class D Amplifier Car Amplifier RMS Power Rating: 4 ohms: 1200 watts x 1 chan. 2 ohms: 1700 watts x 1 chan. 1 ohm: 2200 watts x 1 chan. Max power output: 4000 watts x 1 chan. Fully regulated PWM power supply Wired remote bass level control included System distress indicator Four way protection circuit Adjustable Tuned Bass EQ (0-18 dB Bass Boost) Hi-Speed digital circuitry Full selectable crossover (HI,Full,Low 1-Ohm Stable Full selectable crossover (HI,Full,Low) Die-cast aluminum heat sink designed for massive heat dissipation from three sides of the amplifier Heavy duty aluminum alloy heatsink or High-density split-dome convection heat sink for extreme heat dissipation Platinum-plated RCA level inputs Platinum-plated screw terminals Variable low-pass filter (40-200 Hz, 24 dB/octave) Variable subsonic filter (20-50 Hz) Variable subwoofer EQ @ 45 Hz Frequency response: 20-200 Hz Signal to Noise Ratio: 100 dB Dimensions: 13-3/4"L x 8-1/4"W x 2-1/8"H 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier. Authorized Internet Dealer

you will need some battery's to take the strain of the alt but you want to have enough batt power to run the amp/amps you are running ....its gonna need all the power you can feed it

apparently paypal takes a percentage unless u do a personal money transfer (shouldn't be more than 10%....im not 100% there will be fee's )just didn't want any surprise's ....

i have a brand new still in the box power acoustic b.a.m.f 4000 watt amp(3 40 amp fuse say it will only do@1600watts) i bought it to use with my old sundowns and got a hifonics 2500. im asking $150.00 plus fees&shipping my zip is 61462 i dont send anything with out inc. amp has never been hooked up or mounted still has the static cling film on it

if you are set up right you should murder him and his 2100 watts....lol (biggest fuse rating i have seen on there 5k is 5 30 amps 2100watts max...lmao) will be a cooler story when you add you whooped his shit talking ass...

i have seen video of this sub pared with the power acoustic B.A.M.F 4k and ppl had nothing but good things to say about both...(i wouldn't but a p.a sub but that's me) i think you should be ok it looks like that amp will put out 2100 watts fuse's X voltage 5 30ampsx14 =2100 ...so it can NOT do its rated 5k but should push those subs nicely...i would have to agree with every1 else and say you could get a better quality sub for that money but be sure to get what makes YOU happy

the string trick works or you can cut the old belt to where you want it then drill a hole at each end the use a peice of thick 1 starnd wire and link the 2...just be sure to twist the wire opposite side of the pully on the belt...works for me when i dont wanna drive 30 mins to get a belt

Yea, if I can manage to make it fit I think I'm going to go with 2 lvl 4 15s with 5 parts if it'll fit. that may be a tight sqeeze make sure you have at least 18" wall to seat so they will fit wth a box and that ur at least 33"wide and you can make up box size by goin taller

my brother had 3 12"s in a 07 ranger ext cab it hit pretty good and didnt have to cut anything.... i do know if you fire the subs at the floor wth a spacer so the subs dont hit the floor board it seems to hit best i think his sounded best with the 2 hifoincs brutus 12"S on a brz 1600 in a slot ported Bbox myself he liked the 3 kenwood 12"S tho..lol shouldnt be to bad u just have to lean the pass seat all the way up to get a box in there