will77530

kicks stick out probably 2" in that camaro, so doesnt interfere with anything

somewhere in this build log there are pics, originally were sealed now are converted to infiniti baffle, welded 1/4" steel rings into the kicks filled any gaps with glass and now when i get off my ass and finish them will have some cool trim around it http://www.stevemeadedesigns.com/board/topic/127459-67-camaro-the-blue-bomber-edit-now-the-green-machine-not-done-final-edition/page-39?hl=%20blue%20%20bomber

we put dc 8s in kicks for midbass works pretty well in my opinion, true sq guys will tell you the response is too slow but in the vehicles we have built with them there has never been a complaint

complete subs only no motors sorry

if you raise tuning it will perform better with the truck sealed

battery power =)

trying pulling the subs out and swapping them if the noise is coming from the same sub there may be an issue with the sub if it switches subs then we know the issue is with your enclosure

any other questions you have just give us a call at the shop we are glad to help 855 775 3299

with altenators you get what you pay for i only use mechman so thats my recommendation sorry

its not that they suck just in your application they will be a waste of money they are used to help steady slight voltage dips not dropping a few volts every time the bass hits. so they will get drained and its just another thing your alt has to recharge even though it isnt really helping

definately seems like a loading issue to me, ideally you want the subs the same distance to the port

could be a loading issue pics of your enclosure please. also thats a pretty high tuning are you playing below tuning when this happens?

does this have the same board as the now ct sounds amps?

the rubber glue is for the surround and dustcap the ca glue is only for the spiders, please give us a call if you have any other questions 855 775 3299

both up

unfortunately the 8s do not have any options available

23x20x59 port 18.5x7.5x18L net volume 10.92 port area 138.50 tuning-35.14. should give you a decent bandwidth and do well on rated power

with the dimensions you listed you dont really have room for two 18s your right at 10.70 cubic ft

the m3 xl 15 hasnt been oficially released just yet, we can build them but havent finished the testing 100%. i do not think the rms will change at all even when we finish all of the testing

i would call johnny at sky high car audio he knows eclipses inside and out

all of ours subs are good for daily =)

i would just read them individual to be sure maybe he sent you a d1 by mistake and one of your coils is blown

i appreciate your effort =)

each coil reads 1 ohm? or it reads 1 ohm after being wired to your amp?

first thing i would do is measure the impedance of the voice coils