DGold

Just need a few prices per: Subs XL 10 XL 15 with direct lead option Amp 9k 16502 - I have no dealer in the area. Please and thank you very much.

If possible I need a price check on a recone for a m1 xl 18. Also the price of a m2 xl 15 and xl m2 18 16501, sorry forgot haha Please and thank you.

haha thank you very much. I don't think I will ever have a set up that cant play 25hz daily. Feels too good and relieves too much stress.

Glad to see another happy customer. Makes it a lot easier when recommending them to others.

To run at 1 ohm, you will need 2 D1's. You could get 2 amps @ 2000 watts RMS now, usually 2000 watts will run you around 200$ so you could get right around your budget. From the givin options I'd go with the Audiopipe. They have been clamped in the past and will do rated. You will not havin the perfect electrical and after rise you arent going to see 3k all the time out of any amp here. Remember you get what you pay for. Do you intend on upgrading in the future? Most likely. Money was tight for me so I considered this when choosing. It's easy to just grab another 3k amp later, than havin to replace most of the set up. Plus buying a lot of 1/0 wire gets expensive.

Big 3, and probably 2 big batteries if you dont want to get an alternator. You will be running around 3k just to the subs so you are gonna need it. Figure out what your alternator can do and go from there. You're on the verge of needing a bigger one though.

Just gotta measure how much 0 gauge you need and buy terminals.

That would suffice, just make sure you have the electrical to support it. May not get exactly 3k out of it but for your budget, it fits.

You have my prayers.

What amps are you running?

Doesn't look good, check this link out. http://www.caraudio.com/forums/amplifiers/172580-official-powerbass-xa-3000-sucks-thread.html It's gonna be tough to find a true 3k watt RMS amp for under 400$. Audiopipe is probably the cheapest I would buy. Unless you look around and can find a good deal on a used one.

haha yeah they would, or if you save up a little a Crescendo 3k would make you very happy, i believe they are around 550. That Audiopipe will work fine tho aslong as you wired it up correctly.

They will love more clean power. I have mine running off a single AQ3500 at 1 ohm and am excited to give them more.

Umm actually i am not. This isnt my first build with these XLs... Just making sure, take it easy bud, I wasnt being a smartass. Just wasn't sure why gain position was worth noting.

I mean this in the best way possible. The gain is not a volume knob so what does this have to do with anything, unless you just turned it up. and its actually lower than where it needs to be. Chances are you're just going to clip the shit out of those subs if you just turn it up.

The Audiopipe may be the way to go then. I will look around a little. 3000x1 @ 2 ohms means if you had 1 speakers ran at 2 ohms it would receive 3000 watts. Since you're running 2 speakers at 2 ohms they will each receive half of that, so 1500 per sub. I will look again to verify but I am pretty sure the 3k is just two 1500s strapped internally, or atleast they use to be, so you could run that amp at 1 ohm and get 1500 to each sub. I will check that tho, give me a sec.

What is your budget like? Maybe I missed it but yes definitely get 2 D4's and run at 1ohm. Depending on your budget, can then figure out an amplifier.

Just built a box for a buddy of mine for a single SA 15. We went with 3 cubes internal tuned at 35hz with the port on the drivers side for an Escape. Since you're running a little more power, I'd hover closer to around 3 cubes internal. And I just noticed your box specs and they seem to basically agree with what I would do. Maybe someone with a lot more knowledge then me would come in and verify but as far as internal dimensions and tuning goes. You should be good. The SA is still able to handle the low notes pretty well. Playing 25hz without a problem on around 750 watts RMS. Check out this thread for a video of it in my friends Aveo. It is the same box. http://www.stevemeadedesigns.com/board/topic/122592-25hz-aveo-door-flex/ Literally posted at the same time Mr.Cashdollar.

I run my 3500.1d at 1ohm nominal and temporary running my stock alternator with a 6500 and 3100. I drop to low 13s on the low notes. I do normally run my 270 amp Mechman, with virtually no voltage issues. Finding out the amperage of your alternator would be a good start. I would definitely recommend 2 good batteries if an alt is out of budget. Maybe Deka or Shuriken. While your voltage may not necessarily be awful, if an alternator fits your budget, by all means do it. How much are you able to spend and what is this primarily for? Do you demo at idle mostly or are you usually driving around? It all factors in for your needs and I am talking the best you could do to support it with no half assing. Not overkill. We can then give you the best for your needs. Obviously if budget isnt an issue you're going to get a lot of "350+ amp alternator and 3 XS Power 3100" responses Which is ridiculous.

basically all Jeezy but I usually go with White Girl and Put On Worldwide Choppers -Tech N9ne Delusional - Tech N9ne I'm on Patron - Paul Wall so many more just a few off the top of my head.

I will be one of said friends.

SA 15's are 235 brand new but are currently on sale during October for 190

Thats on a single bl? Good shit man. Here's all I got, have done a little better but don't have it on camera yet.

It's how he's holding the camera. You can still see everything. He moved it around a little, have to ask him why.