LooneyG

2 x 10K Shipped to 52806

That is a decent Price and as for Ordering one Online you might want to check with the Local Shops first to see if they will even Install one around my Area that is a No we don't Install something we didn't Sell...

Pull the old Fabric off and then just use a coarse brush to scrub all the remaining Foam stuff of the Cardboard then apply the Material like I said in my previous Post and you should be fine

If it's made out of Cardboard then don't use the Shower Idea all the one's I have worked on were some sort of Fiberboard kinda of stuff

Sorry about that I forgot to mention that yes just remove all the Fabric first and then that Foam Goo Sticky I don't know what to call it usually washes of with some Dawn and Hot Water and a little bit of light Scrubbing Action

Super 90 will work just fine just make sure you Spray everything and then kinda Roll the Material starting from one end don't just drop it on the Headliner Board because you might end up with bubbles and those will be the Areas that will come loose sooner or later and make sure you get all the old stuff off the Headliner Board I usually stick them in the Shower turn on the Hot water and scrub them down with some Dawn then let the Board dry for a day or two and then get to Work

I've used Super 90. I usually Spray a little on the area that the Velvet is being applied on and a little on the back of the Velvet try not to soak it then wait a few second and get moving

I bet you get a lot of WTF looks like "Is that coming from that Minivan ?" Nice Vid Post some more Pics too

That Cat didn't give a damn that was a good Laugh

You should send them back since they come with a Full 3 Year Warranty.

You should try to give it a 20 ~ 25 Amp Charge for about an Hour or Two I've had to do this before and then once and if you get a decent Voltage reading give it a 1 or 2 Amp overnight just to top it off

The Hoe is lookin' good on them 6's Meade

Happy B-Day !!!

It has TYC Clears on there now Check out the Pics I've got posted here: http://www.stevemeadedesigns.com/board/ind...?showtopic=8549