Skullz

Personally i would just use full range and not use any of the on board crossover and instead use something else to control that portion. Blowing a tweeter has nothing to do with crossing something over and more to do with the speaker itself not handling the power given it.

Musicmatch can convert thousands of tracks in one run vs. going through every track doing it 1 at a time.

Will your next run include those other makes and models not currently made for be included?

I love the ability of being able to completely redo track tagging with it.

Musicmatch works like a charm. http://www.oldapps.com/musicmatch.php

That should never happen to any vehicle on the road and as newls said it was prolly in a major accident and really needs to be gone over with a fine tooth comb to make sure your frame isn't cracked and all mounting points arent' damaged in any way and intact.

Just go to court and see what the judge has to say, i have seen judges be pretty cool to first timers as long as your polite well dressed and give a good detailed explanation on the events that happened. He may dismiss or reduce the cost of the ticket to something more affordable as everyone is being pinched in this economy.

You should really join this forum if you haven't already as they'll know every damn problem you can run into and more than likely help point you in the right direction on getting it fixed. Every make and model will have its own set of problems and going to a forum dedicated to your make can go a long way in helping you get it fixed or atleast knowing the most common problems they tend to have. Best part of those forums are people selling parts that may be hard to come by any other way, good luck and hope they get ya fixed up. http://mitsubishiforum.com/forum/

Sounds like the coil is rubbing on the pole as it travels up and down, with the speaker out of the box try pulling on the sub lightly to see if the spider is still attached on the outside and check the spider near the coil to see if it hasn't broke free there also.

Torres calculator has port correction built where the others do not.

Not to sound like a jerk but i'm pretty damn certain you didn't bend a rod but definitely bent the valves and need a new or rebuilt head, better make damn sure they replace your water pump while they have that all apart or you'll be replacing that pretty soon as well. Since its taking so long on them getting your car fixed, i really would contact the B.B.B. and see if any complaints have been made against them in the past.

They're 12 like the rest out there unless otherwise noted on the battery. Depending on the car and how the alt wire is ran make sure you have atleast 8ga. going to the underhood fuse box for max power to the rest of the car.

nope, stock wiring is the suck and even when you upgrade to the big 3 you can still have dimming but no where near as bad as without it.

Watch some of his tutorials on tinting.

Weather channel had some awesome ones they showed with massive amounts of lightning in them and the clarity was totally stunning.

Longer the port length the lower frequency.

Switch to cable. EDIT: Usually you have to have the box replaced.

Yeah that is a shared chamber and around 82"/85" port area for the 2. If you don't have torres box calculator might wanna get it and play with it. http://www.stevemeadedesigns.com/board/topic/38791-torres-exposport-box-tuning-calculator-updated-310/

What i was able to find out on roe was more than 2.0 and more towards the max on port area and tuned to 35hz/38hz, so your prolly looking for 5.5 net with a larger port area and tuned to 35/38.

What dimensions do you have to work with as far as box size?

What subs do you have so we can help you.

Do you have a volt meter to check and make sure you aren't dropping voltage, if that turns out that the voltage is fine and stable its time to look at the amp as maybe having a problem. How well do the speakers sound at the level they're cutting out at? Do they sound clean and clear or is there some noise or distortion to the way they sound?

Your prolly having a voltage issue causing the amp to cut out on you, do the big and go from there if you haven't done so already.

Thought you were going to make a video today of the sub in action? Was there something wrong that changed your mind in how it sounded or played?

Without a type and make of sub along with box dimensions we can't know what your port would be.