ChevyBoy95

the 6 12s slamming at he same time would look amazing, thats why i voted 6 12s. But in reality, i like simplicity, so i would personally do 2 18s. (Ive always had 2 this and 2 that, now i love having a single sub setup)

Congrats man, happy for you.When had you ordered? 2 months ago, but there was a compromise i made. the next shipment of 5s comes in in around 1 month(i wasnt going to wait). and i think mine was the last one...

GOT A LEVEL 5 MOTOR AT DC HQ WITH MY NAME ON IT!!!

-2 12s -300 for both -500 to 600 rms ea. for those with reading disabilities.

glad to help

My only suggestion is to take it out of the dash and relocate it. Like on a fabbed stand or something rather than sitting in the dash that flexes like crazy.

you just have to make sure they dont cross frequencies with each other too much. You have to think of it like a component system, each part does a certain frequency. So you would need the 15s to play say 40-25hz and the 10s crossedover to play 40-80hz. i personally would just stick with the 2 15s and not worry about the 10s.

thats crazy how it can detect 1% distortion. thats not even audible.

how is the woofer displacement .72? 18in woofers are around .25

i just dropped 18 in crunk's fund.

i just sent 18. COME ON PEOPLE!!!

im in, just tell me when and ill toss 20 in.

it didnt make us mad or anything, everyone on this forum at one time had to start from square 1.

if you put it on slave you will get no output at all. YOU NEED IT TO BE ON MASTER

yea i forgot to change it, i fail.

looks good.

wow... ok.... there will be a knob on the side of the 2200 that will say subsonic, use a flat head screw driver and adjust it to a little under your box tuning. Then, about 3 things to the right, there will be a knob with LPF over it, adjust it to 70-80hz. theses "knobs" are where the bass remote plugs into the amp. try reading the amps manual.

if the one he is mentioning is the same as you listed. i definitely would stay away. rated to do 1250rms at 1 ohm but does 998rms at point of clipping. lolol

EDIT: I WENT RETARDED AND DIDNT CHANGE PORT HEIGHT AND ACCOUNT FOR THAT SO MY PIC IS USELESS!!!! SO I TOOK IT DOWN TO PREVENT CONFUSION!

If only it had that option =( I do that by widning the port width yes? if so i changed it to 4" but then the Hz went way up to 55+hz i changed the port length but i had to change it by some rediculas amout just to get it back to 37hz. Sorry im epic fail when it comes to ports =/ you have to work the box size along with port length and width to get your desired port area and tuning.

looks like the middle one might have unloading problems.

when did you order? mid june, so.. about 2 months ago.

i have bass ballin slowed which peaks at 33hz ay -6.8db and stickem slowed peaking at 29hz. and grippin the grain slowed peaking at 32hz at -10.6db. or do you need non altered songs? dope money junkie from decafs peaks at 32hz at -10.2hz i can send them to you if you want them. oh and beats 4 my van peaking at 31hz @ -6.5db

audiotechnix FTMFW!

trust me i would in a heartbeat if i had the cash. but that would require a lot more power, electrical upgrades, and the $900 SMD.