Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. Yes and you should do it that way. You should use the medium you use most in your system to tune your system.
  2. You got it. Exactly how I did mine.
  3. if its at 6 ohms, my amp will run fine? will it still put out the full 750 watts? Safe, yes. 750 watts, no.
  4. LAME you can try it in parallel, it's 1.5 ohms. I don't know much about kicker amps so I have no idea what it might do. I wouldn't really recommend it if it were me though.
  5. a mono amp that isn't 1ohm stable?
  6. yup. both batteries are connected to the amp.
  7. unless your are putting an isolator in, both batteries will be connected to the amp. And there is next to no good reason to use an isolator. From your alt, connect your front battery with 0g. From your front battery, run a 0g wire to your back battery. You can frame ground your back battery OR run 0g to the front. I would recommend the extra run of 0g.
  8. I know, but the big 3 is an upgrade to your charging system wires, in the front of your car. How exactly are you going to upgrade that in the back of your car?
  9. can you explain how you do the big 3 in the back?
  10. For the record, I did a sparetire tub so I didn't need fleece. I did use lots of mat I didn't know the resin shouldn't be honey like in thickness and the resin I used was very honey like. It was also about the same price as the stuff linked above. Guess I know where I will be getting my fiberglassing materials next time. Thanks for the explanation!
  11. do you have SVC or DVC subs?
  12. What is wrong with the resin from home depot? Or better yet, what makes a resin good or bad? I used to the stuff from home depot (3M or Bondo can't remember now) and it seems to have worked fine.
  13. I think it became a rather large list and rather un-manageable...
  14. what power and how long are the wires going to be? and are you running all 4 speakers on their own channel?
  15. that all makes total sense. I think I will try it that way. The "S" sound in tweeters drives me crazy so I like this idea for getting rid of it. Thanks everyone.
  16. RF website said 18db HP @ 3K and 12db LP @ 3K I have a 3sixty.2 and a 4 channel amp, so I have ideal equipment for active. However the 3sixty does 12db and 24db slopes. I know the time alignment is easier with active, but this particular set of components has the bi-amp ability so I can really time align either way. I do like the idea of having the 3sixty control everything though so I can really get nit-picky with how it sounds.
  17. Cool. 20% seems significant to me so I will just skip the passives then. The RF website says the crossovers have a 3k HP and 3k LP. how much can I safely vary from those, mainly the tweeter HP number?
  18. Generally speaking, how much power is consumed by passive crossovers? Which leads to my next question about my T1562-s components. Now that I have a mono-amp for my subs, my T400.4 is all for my mids and highs. I am only running the single pair of components off the amp. I can use the bi-amp feature or I can run straight active. Just using the bi-amp feature is easier but neither way is too difficult.
  19. Sorry man! I went through that too when I was younger.
  20. What do you mean by most powerful? Most output power?
  21. Oh, I have AT&T. My dad has Verizon and it worked like a charm in Sandusky.
×
×
  • Create New...