Jump to content

MrSkippyJ

Members
  • Posts

    10293
  • Joined

  • Last visited

  • Days Won

    22

Everything posted by MrSkippyJ

  1. There most certainly is a break in period, there is just no need to do anything different during that time. Any sub will loosen up in a few hours I play time, not sure where you are going with that.
  2. It really depends on how much and when your play your system loud. I have 2k on a stock alt and yellow top but don't run full out very often and when I do it is usually short amount of time. Do the big 3, get a volt meter and see what your voltage does. If you find I tends to drop too low, start with adding a second battery. If that doesn't help you know you need a bigger alt.
  3. 1. Alt to battery + 2. Engine block to frame - 3. Battery to frame - Use 1/0 gauge wiring.
  4. Also with the power side of things, I would start with the big 3 and then just check and see what your voltage does. I would guess you don't need to upgrade your alt for 1300 watts but you never know. I bet with a good battery and big 3 up front you could be ok, if not then just add a good battery in back.
  5. No need to keep them sealed for SQ, if you went ahead and spent the money on the subs you might as well get your moneys worth out of them and put them in a proper ported enclosure.
  6. Gain depends on your RCA input voltage, typically it is better to stay away from bass boost. Crossover to what sounds good to your ear but generally in the 50-70hz range. That's about it.
  7. the easiest way to describe it: a free air application does NOT separate the front and rear waves, an infinite baffle application does. and it's all good
  8. it isn't also known, free air and infinite baffle are two different things.
  9. Ys will work.
  10. Try it with the H/U turned off.
  11. lol what? i've never heard of this theory before. since when should "high end" amps output twice their rated power when bridged? Most Class A/B amps back in the day rated their amps at about 20 to 40 percent of their capabilities at 50 htz to where everyone now rates power at 1000 htz ... who here has ever seen a bass amp play tones at 1000 htz on a daily setup ... You would be suprised at what a class A/B amp can do for subs (Musically) ... I'm not talking about hair tricks and burps ... True, but tricking the numbers didn't mean an amp double it's power when you bridged it. Finding a way to make the rated RMS numbers lower on the package was a gimmick for competitors to run in lower power classes.
  12. i still want to know how 4 gauge wire effects impedance rise.
  13. and do it with 15watts.
  14. how exactly does an 800 watt amp become a 1500 watt amp when you bridge it? OP-the gain to cost benefit is going to be ridiculous here. You will see a minimal drop in distortion (most likely not even audible) and a minor increase in efficiency. Now ever, if you can't support 1500 watts @1ohm the efficiency increase going to 1500 watts @4ohms won't be enough to help. Edit: Ninja'd by Kranny
  15. i am going. not competing though, but i will be there with my dinky car
  16. Switch the phase on one input of the LOC, see of that helps.
  17. I had U-Verse for about 2 years until I had to move. I never noticed my Internet being slower when any of the 3 TVs were being used. The only thing that bothered me was using their 2-Wire router.
  18. What H/U do you have? What track are you using? Are you using sub outputs on your H/U?
  19. Nothing better for emails and texts. That's about where it stops though.
  20. Fusing on the amp doesn't protect the wire. Fuse any wire coming off the battery, it's that simple.
  21. Looks normal. Just an area that he probably went deeper in or used more color. It looks like it is scabing over
  22. I probably wouldn't advertise this kind of practice on a sound forum where you MIGHT want to possibly sell something. I probably wouldnt buy from a guy willing to do something like that, and likely others won't either. Thats fine i dont sell things used anyways, i give them away. I would worry less about selling things and worry more about insurance fraud. Just my 2 cents.
×
×
  • Create New...