Farmacist

I had this for a few years, basket is cracked, and I still need to take it off. It'll ship without the basket. 1. Product: Motor of a Soundstream XXX-15 2. Specs: 4" coil 80 + lbs paired with right coil can take 5k+ 3. Description/Condition: mechanical 10/10 Cosmetic 7/10 (it has scratches on the bottom which are pretty much inevitable to stop from happening from sub loading Chrome is in decent shape, but I can paint the bottom if desired, either RED, BLACK , or SILVER (por15 paint, not cheapo stuff) 4. Price: : 230+ shipping NO TRADES 5. Pictures:

1. Product: RD Alpha 18'' D2 2. Specs: 1500-2000rms Dual VC 2ohm * Paper cone that is heavily damped with long strand Kevlar fibers * Wide roll three layer surround foam * Dual 1” tall high power 120oz magnets * High excursion motor structure * Hot forged 25mm deep t-yoke * Spider bolted to basket * Cast basket * High temperature CA glue * Black anodized aluminum former 3. Description/Condition: I've had this sitting around for awhile, great 18" for someone on a budget. 10/10 mech 8/10 cosmetic (scratches on the bottom mag) 4. Price: : 200+shipping 5. Pictures: ** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED ** ----------------------------------------------- This message is automatically inserted in all classified threads. Please be advised, all buyers and sellers should satisfy themselves that the other party is genuine by providing the following via PM to each other after negotiations are complete and prior to dispatching goods and making payment: 1) Telephone number. Call the number back at a unspecified time and make sure that it is the person's correct phone number. 2) Name and address including postal code 3) Valid e-mail address. Send an e-mail requesting a response to information about the deal being made. DO NOT proceed with a deal until you are completely satisfied with all details being correct. It's in your best interest to check out these details yourself. If transaction was completed on CACO, please use iTrader to record feedback. Potential buyers/seller should check iTrader feedback also before continuing transaction.

thanks guys for the input, I think I'm just going to go black with them, now that I think of it the drums are silver so it would be kinda odd looking, well we'll see what happens

are you the guy with the S-10? id just stick with black cuz silver would show any dirt pretty easily IMO. gloss black would be decent though, also IMO. pics of said vehical? yes I'm the s10 guy, here's the best pic I have before I took it apart .. the back end will be lower once its

Ok I'm about to paint my leaf springs, and I'm torn right now by what color to choose, black or silver .. The leafs are apart so each layer is getting painted individually.. My frame is getting painted as well, semi gloss black, so should i go with the contrast of silver, or just black to match?

well... there's always PASMAG... I'm friends with a couple editors over there

Pendulum - Set me on fire ^^ sooo good for highs

thats 60fps per eye

I'm actually going to make a buildlog tonight for it , I would do it right now but I don't have the pics on this computer.

lol sorry, that garage doesnt have an opener, its a manual lift

yeah i made one a while back on here, but it was going no where, too many things changed. I'm making a new buildlog once i get my shipment of batteries, which should be by the end of this week

they already banned it in michigan , i just found a liquor store that still has them hahahaha

wow, forum is kinda moving slow tonight

I'm 2 and 1/2 4 loko's deep right now , izzz verrry niiice (borat voice)

why are there always fat people in dodge neons ?

I'll put it this way, I doubt you'll ever find an s10 with the same amount of equipment in it. Also, it's going to be entering the IASCA TunerJam show at SBN

I'll have a new buildlog up for this tomorrow, there's a ton of stuff going on with the build.. pretty much the same size as trippi's but the underbody and exterior is being redone as well

I'll have a new buildlog up for this tomorrow, there's a ton of stuff going on with the build.. pretty much the same size as trippi's

uhh dont really have many pics of them right now, I'm right in hte process of buying all my stuff, the alts just came today. Here's a pic of some of the mids nad highs, I have to make another order just about the same size as that one. I'm making a new buildlog for this, so stay tuned to see one.

oh and its in a 2003 s10 Xtreme ext cab 4.3L and it has a walkthru done to it

The 2 16v are running 2 Soundstream 15k's Lol , and the 12v is running 12 Rubicon 600.4's , and 4 600.2's for highs and mids

The 2 two alts on the VCM will be powering 20 XS Power D1600 Batteries, and the other will be powering the hood batt, a Xs power S3400, and a bank of 3 XS D3100's 12v for my highs and mids. I might be able to squeeze another alt in... but for right now this should work out just fine.

So I just ordered 3 alts from mechman,the Ad244 270 alts, I was about to order the new 350 amp alts like SM's...but they put out lower at idle so I decided the 270s are just fine. All of these are going on a 2003 S10 4.3L , 2 of them are going to be on a Xs power VCM running at 18v, the other is for 14.4