CaPRiCEx383

I know for sure It's not bottoming out. What should i do? Is it fixable? Is it worth it or is this thing a paper weight, I've never heard this particular clicking noise before

So i just picked up this sub today and i take it home and play it and this is what i get.. WTF lol http://s732.photobucket.com/albums/ww326/LiViNxLoUd/?action=view&current=CIMG1471.mp4

Alright, It's pretty easy to do all you would really need is a soldering iron. I much rather prefer this method over the flashing because the failure rate drops substantually. Now i would get into specific details on how to do it but this dude already covers it in the video, All you do is open up the old drive, Desolder the board, Open up new drive and desolder board and then swap the old board to the new drive and solder it back and viola your back in buisness.. Only thing id do different is use diferrent color markers on the white wires, Too much room for error if you mix them up. Well i hope this helps

Dont flash it. Im at work right now and boss is on my ass about the phone so full reply later but i can do it for you but its not worth the money to ship it. It's so easy you can do it yourself, give me an hour and a half and ill post in here again

Shit im metering with corridos one time for the fuck of it lol Dam how did u do? I metered with a corrido once...el tonny by alfredo olivas...i did i 140.7 with out an epicenter...could of hit way louder now that i have it Show was cancelled today, They moved it to next sunday. My car doesn't meter well anyway lol i got a 137.2 with 4 12"s last show but it should be higher at the next hopefully

Where did you meter at? Did they end up meeting today? Or was K1 not cancelled lol

Audacity -> Open Said Song -> Highlight one second of note -> Stop -> Analyze -> Plot Spectrum -> Change 512 to 16384 -> Change Linear Frequency to Log Frequency and your done check out the frequencies..

I think most people use audacity to figure that out, That's the only one I've used. I'm not sure if that is what you want to do though.

Shit im metering with corridos one time for the fuck of it lol

Yeah placing is pretty much the same 139.9 149.9 and 159.9 being the best scores. lol yeah weird i know but like i said before its a fun get together and the tacos were alright too

Ehhh, Not really. You basically get two 35 second runs to get to your peak SPL, Doors open, Windows down , Sealed up doesn't really matter. Music or Tones, the Mic is placed in the legal position on the windshield though .

This Sunday May 15th K-1 Speed 19039 S. Vermont Ave Gardena, Ca 90248 [3pm-9pm] Cost: $10 Plus $5 gate fee ($10 retries after initial 2 attempts) 3 Classes: 130's; 140's; 150's (Peak hold, not average) Prizes: 1st Place receive medals in each class; 1st and 2nd place in each class will receive personalized certificate with official score. This place is very chill its a monthly Car Show with a Bass competition on the side, Not official but its fun. Pics of the past show on April 17th. http://s1131.photobucket.com/albums/m541/jfernandez2x/4-17-11%20California%20Cruizers%20Cruise%20Night/

Under find my content there is a drop down menu that you can put on Topics you've started

You can go into your profile on the top right and click on my content when you're there and i think you can look at the topics you have created

Im ready i just need to wash my car and make it look a little decent lol

They are decent subs, You get your moneys worth. They are 50 a pair shipped at an ebay store.

I got mine on ebay $13 shipped for a pack of 10. http://cgi.ebay.com/GOLD-RING-TERMINALS-1-0-GA-10-PACK-GRT3-10-/400201693289?pt=LH_DefaultDomain_0&hash=item5d2de13869

Single 12 was 2.5ft at 32hz, 2 12's was 3.5ft at 38hz, and 4 is 6ft at 32hz.. All boxes were around 12-13in of port per foot.. All powered by a jbl 1201.1

When i metered my single HFi 12 the loudest i got it was 134.xx average on music and that was with a bad battery and horrible voltage drop. Then i went up to 2 hfi's and it got a bit louder and never metered it. Currently i have 4 but i haven't metered those yet either but it's way louder now.

http://www.stevemeadedesigns.com/board/topic/104550-12v-led-strips/

Nice, Looks like a big improvement from the stock ones.

Link?

How i did mine was with a baseball bat, The biggest one u can find but make sure It's an aluminum one. Then have someone get on the car to push some weight on the car and have another person hold the bat on the tire and then have someone else drive the car slowly back and forth It's pretty easy and if you already own the bat It's a free job and it comes out with good results.

I had about $250 in my previous system which consisted of two Hfi12d4's, JBL 1201.1 and a walmart wiring kit. It got down for being low cost, won my first competition with that system in 129.9 bassrace. I have about $150 more in my current system which is 4 12" HFi12d4's on the JBL 1201.1 and and a KNU Flex 4 guage kit.