bdog

jersey shore!

theres about 12 inchs but choking the port would only lower the tune i wonder if a bad rca could be the problem i used a cheap rca splitter because the deak only has one rca out for subs

i started with the ssf off so its not that

k thx for the help. im not touching the box till the subs break in a bit and ill go from there atleast the port is removable

dont get me wrong it plays lows but it destroys highs and punch bass like a jack hammer it will give you a head ache lol

i may glass some in its only 2500 watts might not need it. ssf is set to 20 ish and hpf is 63

there is no bracing a no common port walls

Uploaded with ImageShack.us

i didnt that now it says a tuning of 35.10hz

i should mention that the subs are brand new 0 hours play time

saz-2500 head unit its pioneer 7800 i played with the gains and subwoofer lvl lpf bass boost to see if there was a combination that worked i didn't dd1 yet

there is a extra baffle but i did not include it to keep it simple and removed the .75 from the specs

Uploaded with ImageShack.us

thats what i used to build it. its tuned to 35hz

i built this box for 4 sa-15's in a yukon the box is 48x34x22 with .75 mdf the port is 14x14x16.5 . subs up port back . The problem is that it sounds like its tuned to 50-60hz .its only hits punch bass or high bass hard for example the highest note in "i put on for my city" non-chopped. Any ideas here kinda confused?

have you checked the side panels beside the back seats?

Thx for not coming out west to compete ! We appreciate it lmao . Dam pretty impressive

The v2 is built to play lower iirc

they say they are a 1000rms as i have had some b4 but they would not take 1000 for long

nice!!!!!

give it a clean 600-800 rms

find a battery plus store they will have lots of options

deka intimidator for one

you can get agm batts that are cheep and better than a yellow top and that sounds like a great first system

looks intense