crunkjuice1

The one in the middle looks exactly like the one that comes with the 5901, if its anything like that one I wouls say go for that one as long as it controls all the functions you should be good to go.

shooting from the hip on this but I say $3000???

You guys are on top of your game!!! I will give that a shot.

Thanks guys. I had the alarm installed at best buy and they kept the manuals. I'll check the link out too, again thanks.

I read another post saying most alarms noadays have the starter kill feature. My question is it something that the installer automatically connects? Is it part of the way the alarm naturally works? Is it the little on off toggle switch that comes with the 5901?

I have a viper 5901 and I have always read people saying they are going to be adding two or three additional sensors. I told an installer that I already had a proximity sensor and I was thinkig of adding another shock sensor but he said I could only have one sensor. I am posting a pic of the input/output area on the main unit and I am asking for help from anyone that can name each connection spot from left to right in the picture.

testing for function of each wire is example you need to find the turn signal wires, dome light, horn, ignition wires before they are hooked up so you know your in the right place. You can definatly skip on the remote start to save money. If I were you just save money longer and get it done somewhere.

Thats cool as hell Steve. I like how I can see a very good example of a some what small box in a area where space can be an issue and still let the SMD shine. keepin it real

only thing I can add is very simple, follow the instructions they were written for a reason. Just like anything else people will try to skip a step here and there and then turn around and blame the DD-1 for their fuck ups.

Where do you get at tensioner gauge tool??? Anybody have links to that???

Those flipHD's are badass for the price! Thanks for sharing!

whats your battery setup in the back? I assume if you have enough battery reserve for a 4ch and a mono block amp connect the power and grounds of each amp to the secondary battery/batteries.

post this in the mechman section and see what they can do for you. Best bet is to just call them and see what if anything can be done for your car. 1-888-632-4626

Thanks all the trucks locks work fine with the factory key fob the tailgate opens and locks along with everything else so that will also trigger the viper alarm just like any other door if opened the wrong way while alarm is armed?

I have purchased a 97 expedition that has a factory alarm that I am going to be transfering my sytem into over the next few weeks. The trucks front doors have been pryed open through the keyhole so my questions are what is the point of the factory alarm? does a theif basically disable the factory alarm when entring the truck like this? I pulled my viper 5901 from my old car and saving up to have it reinstalled into the truck but will there still be a loophole theives will have with trying to open the doors with a screwdriver for a key? I will obviously replace the handles but these are things I have in my head that hopefully someone with alarm knowledge can put to rest.

If your mechman alt has a AVBM harness and you set the pot to a certain voltage I think it is tricking the PCM? Theres a 1 volt difference so naturally it would charge a bit faster. I would just do without the stock battery if it isn't a agm battery also. about the check engine light I'm at a loss on that at the moment. I would rather not "fool" the PCM and just let it do what it wants to do naturally. this is where I'm stuck at personally.

Good luck! keep pushing all that work will pay off.

They take forever to get around to you for one customer service sucks and most times I have to make another trip because part is different and this is experience on multiple cars. On the other hand the print outs are cool, It just seems that as soon as I say "I read this online" I blow them out of the water and they work there lol

good job!

This is indeed EPIC! They have damn good pricing this is going to turn out well!

Damn thats cool. how much more do you have to go?

Do you know if the one for p1000-1bd is the same?

just because there is nothing listed on the sites list dosen't mean they don't have anything for you. The best way to get a concrete answer is to just call each one up and see what they have to offer if they do carry a unit for your car. Both companies always making new things over time, just timing when your down for something might not always be lined up right.

Sweet alternator setup I'm gonna go back and re read that part but just to ask, are they all SP's or your main alt an XP and you just added three SP's??? Great build!

I love your subs bro! Honestly flex is in no way a smart way to measure anything. I know other poster was mesing with you, but still take care of your stuff.