uhoh_45

i'm building a new box for my apx 18 and dont know shit all bout aeros i have 8.5 cubes to work with before all displacement i was wondering what size aero would be best and how many to use i was thinking single 6 or 8" aero but once again dont know shit all bout aeros

weight on it or something like that could have snapped it or a shitty old rca could have been problem

ah perfect i really appreciate the help there hobby

what yall think bout these

if your walling it and plan on getting loud i suggest you put in a stripper pole and some beefed up roof supports or your going be ripping the roof/windshields going be popping

so your saying 17 gauge is pretty thick?? i measured a piece of C channel i use at work which happens to be 17 gauge and i can cut it no problem with bull nose snips and my knee which isnt 90 psi so i im hoping this works i'll keep thread updated when progress progresses and sanitary with your blowthrough you didnt have worry bout your back win screen and sparks where as i gotta cut like 2" from winshield so im kinda scurred... + i want it to be as clean as possible and straight as possible as i dont want sharp edges

for the humps i have my bull nose snips and other tin snips (im a fireproofer by trade and have alot of tin snips hmm buddy has a sawzal i think i could borrow i thought of that earlier but figured snips would work

i only need to cut an inch and a half off each side and then straight back and across (taking rear deck out completely)

i was going to pm you just went out to garage to see how thick 17 gauge was with the caliper haha as for the plasma i want to go with the least amount of sparks as we'll be doing this in the car as for the sheers - i've used my hand snips to cut the rear deck before it worked but took lots out of you to do it so i'd imagine the sheers would make miens meat out of it haha i just want the cleanest finish out of this when done i'll look for some pics of what i need to cut

WTF

thanks i'll send him a pm

was wondering if there was any sheet metal workers here or anyone that uses air sheers regularly i'm looking to see if this base model is up to cutting the metal of the rear deck near trunk

http://www.youtube.com/watch?v=uibQgou18Zc

that shits pretty sweet man

basshead your sig is stupid and pointless without stating the vehicle haha and dd subs get loud off low power Mhmmm

i noticed your thread earlier on the 2 15s home theater.... before you go out and buy speakers figure out if you can even put them in anything

where do you plan on putting these subs... in what vehicle or ....?

found the site i was looking at before the link to tutorial this is actually the site i found that on but it isnt working for me with the pictures do the pics work for anyone on this site? Another helpfull site http://www.google.ca/#sclient=psy&hl=en&site=&source=hp&q=trunk+torsion+bars+with+gas+springs&aq=f&aqi=&aql=&oq=&gs_rfai=&psj=1&fp=825210affd154cf0

thank you haha

make sure NOT to mount them to the box or they will shake to shit happened to 2 of mine (and yes the box was built solid with 2x4s mounting to the box and to the amps)

compressed gas

so i've been wanting to replace the springs in the trunk with actuators i seen this a while ago on the net and cant find it again.... i already got the actuators and base idea of what to do i just want to see what others here have done or have seen

im beefing up the area where bike and cart meet so should be solid n good as for those cart tires i plan on getting rid of them and using bike tires

what are your specs? for your wall and some final pics would be nice

if you like dubstep