uhoh_45

shit i paid 300 for my 2 apx 12s... and i thought i got good deal

well this is what i came up with some coupling bolts welded up to some angle iron with hole drilled into it attached to seat belt bolt drilled some holes in some flat bar and bent it up to fit the seat mount 2x4 screwed to it glued down the mdf with 3/16" area routed out so the box is flush and its bolted in for now while glue dries (the alt hread will be unscrewed and box will be put in and bolted down to vehicle as well)

seriously i cant even get to my bench now due to lazyness and it being so bloody cold out during winter

Ha seriously I'm just asking a question here because people say that's one of the knot ways I'd be able to out what I want to in my truck I'm just lookin some stuff up now once more in anglish please

/\ pwned your sig takes up a whole page man wtf

i'm on 3rd wall haha walled off explorer with 4- 15s you can also wall off a trunk by sealing off trunk completely (not mine)

finally something from you that i like haha

after taking out the system/batteries in my lumina you could tell a huge difference... shes got a permanent sag to her and shes loose as hell (ha ha) putting in a bigger system means some air bags for me haha to help balance out things

now i like the look of that its simple looking on the outside haha but whats the inside look like- just bunch 2x4s stacked or what

see i've built one before long long ago and just kinda slapped it together thought it was good enough and never really did much with it so now i'm looking to do proper way of doing it i was thinking of welding in some 5/8" bolts to the floor pan back there and using threaded rod to hold wall down and then secure to back where cut out is with some all thread.. (i donno where im going with this) i dont wanna make it permanent and want to be able to remove it later on down the road this is what i have to work with

i'm wanting info on how you built your false floor for under the wall and how you secured it to the vehicle?? . I'm just wanting some ideas for future build and am stumped (been away from audioz to long ) photos are worth 10000 words ha

Man i wish you had taken more photos of your false floor there under the wall haha shits looking good... you dont get port noise with all them ports do ya?

you lazy bastards wheres the cup holders haha

whats in vehicle/more info is needed

wheres the updates?? i want info on amp... power ratings and shit, i'm very curious in amp....

no its you not giving them the 1 when you do the math and forget to give 50 cents to each parent when you forgot to add it into the total you keep that 3 $ till your ready to pay them back.. so we give mom 48.5 dad 48.5 + ----------------- =97 now we add that 3$ to the problem i give mom 1 $ 1+48.5= 49.5 i give dad 1$ 1+48.5= 49.5 so now there left with 99$ and i have 1$ now heres where it gets tricky again, i take that 1 $ and a divide it by 2 so 1 /2 = .50$ so now we take that .50 and add that to moms and we get 50$ to mom and 50$ to dad and problem is solved

it is bad math look at my post above

97/2 = 48.5 so you add 1 to that your at 49.5 *2 +1 (your dollar) your at 100 you cheap your parents out 50 cents each when you divide 97 into 2 and get 48... when you should get 48.5

so the sub plays 100% and the person your going to sell it to for more then what you paid for it isnt going to get screwed correct?

that sub is sooooooo sexy

take a picture and show us what you did

http://www.jlaudio.com/header/Support/Tutorials/Wiring+Dual+Voice+Coil+%28DVC%29+Subwoofer+Drivers/Tutorial%3A+Wiring+Dual+Voice+Coil+%28DVC%29+Subwoofer+Drivers/656176

just slap another dustcap overtop of that and call er a day

gas aint cheep cuz

impressive ray