audiofanaticz

Yes rusty will sell/ship factory direct

Im sure that has nothing to do with it... His last video update with the civic they took the amp rack out and where going to redo it and slap 4 rf4000bds in the thing. from his amp collection video when he was trying different old amps out he usedd the civic subs for the tests, and the amprack is still nakid and no updates on it. So im sure the OP is just looking to know when the project of the new batts, amprack, and the 4000bds where going to get done to watch the updates unfold:( I dont think he meant anything negative about it.

also ascendant audio has the Assassins that is only a 6 inch depth for the 12s, and smaller for 10s and 8s. or their Arsenal series has a 6.5 inch mounting depth for 10s Fi ib3s 10s are 6.5 mouting depth. Fi SSd 10s are a 6 inch depth or the ssd 12s are 6.5 fi q 10 is 6.5. DD 2510 6.5 dd 1510 thinmount 5 or the normal dd1510 is 6.06 dd1508s are 5.25 (these woofers get down for how cheap they are priced. we did an install with a pair in a explorer and metered at a 147.8db from a pair of 8s at 37hz). 3 or 4 1508s, 1510s would get pretty dam loud, and have no problem taking a solid 800wrms in proper ported box!

Look inro the pioneer flat piston woofers. We always used them a lot at the shop and had great results. 400wrms, 1500wrms peak (not that peak matters, but they have one of the higher peak rating out of all the other flat piston subs) they are optimized for sealed box, as most flat pistons are. only come in single 4ohm coils. but for $109 the price is decent! http://www.sonicelectronix.com/item_18212_Pioneer+TS-SW3001S4.html Otherwise jump down to their slightly cheaper models and you have the options of running either a single 2 ohm or single 4 ohm. http://www.sonicelectronix.com/item_16662_Pioneer+Premier+TS-SW1201S4.html http://www.sonicelectronix.com/item_18559_Pioneer+Premier+TS-SW1201S2.html Otherwise, these koles look kind of promising too, but it is a lower quality manufacture. But still might be fun to try and mess with. http://www.sonicelectronix.com/item_7360_Kole+Audio+MFW-12.html I know Kicker, and MTX also have a few shallow mounts with either single 2 or single 4 ohm. RF also has a P3 Shallow mount with dual 2 or dual 4 coils. But Personally I think Pioneer will be one of the better woofers!! A list to shallows on SonicElectronix.com http://www.sonicelectronix.com/viewcat.php?category_id=41&f_627=2356&sort_order=price_desc#

You speak to Brad at all? Anytime I call for orders or support, I always shoot for Brad, even tho Jack is our salesrep. The flat wire coils that I run in my D's are a bit bigger on ID and OD however then the G series, and at glance from the 9500Zs that where chilling on my table appeared to be idenical to the D coils I run. The G coil I have is also round. dual 1 iirc. Coil is like brand new, just burned tinsels iirc. And every G recone Ive ever done was round, not too sure if the flat is available tho. Maybe not just due to gap spec. But if theres any info I can get for you, just hit me up, you provide a good service for people at great prices, so anything i can do to help I will Edit: PS: In your recone thread, you gave me a great idea for shimming. Most the times I use a manila folder or clear transparency sheets. Never thought about the for sale type signs. I think that would work a bit better then having to overlap other items to get a thicker shim!!

Did you find specs of it? Normally im not nice enough to give them out, but your an exception I have both a 9500G and a 9500D flatwound coil (same coil used in the 9500Z also). If you need peramitors, i can grab the caliper from work, or even ship the coils off to you!

Ouch! tell him he owes joo a recone!

is that like a cleveland steamer? :yahoo:

The normal hc2400 is a stronger battery then the racing series. The specs on the audiosavings website are wrong for the racing battery, they are using the same specs (hc2400) for both batteries. Even look at the weight, every racing series battery is lighter, but both batteries claim to be 69 pounds... Racing specs: CA: 1200A, PHCA: 2250A, AH: 125, Reserve: 256 mins. HC2400 specs: CA: 1700A, PHCA: 2600A, AH: 128

Not sure if your aware of it or not, but per the CA.Com thread, their mission is to keep registering new accounts come on here and flame galore.. Every time you argue with them they are more irritated and continue more and more. just let them hate and give them no response, sooner or later they will get bored and stop with the comments.

LMAO! Poor car! I think i may have some caddy wreaths laying around from some of my old cads

woohoo finally to see a update, and a vid to top it off. Nice vid!

So go buy your own tahoe, paint it meade cherry, but brembo 6piston brakes on it with some 26s, and change the tail lights how you would like. Obviously Meade dont care what others like or what others think he should change. Its his ride not yours. All these people saying what should be changed is getting sickening.

I really love reading these posts about shops being rip offs... It really makes you think on who is the noob that dont research product or get 2nd and 3rd estimates from other shops...

Man up bro! Lols Ill be leaving around then too. I follow Jeremy with my ride, so Im usually one of the first 3 at the show. Just as long as your there before others start to qualify otherwise we wont be able to really do it without messing up the qualifying brackets. But I maybe wrong. I still got to redo his light towers with in the next 10 days.. and get the 2nd leaderboard up and running.. fun fun!

Lol, i seen i was on the top poster earlier today, like 6th or something. Im sure not no more tho. First time I ever noticed it. I just usually keep that window closed so the forums look like the old forums

Using a single amp, you can run it at 6 ohms, 1.5, or .37 ohms. using 2 amps, you can wire it at 3 ohms per amp, or .75 ohms per amp. (2 coils to 1 amp each). or using 4 amps, at .75 ohms per amp.

Qualifying is usually 10-12. so if you get there around 9-10, Im sure once I get everything set up, you can give her a few burps, and find your freq and what not

Your comming? good to hear! I wont be at the april 10th show becuase my buddy got backstabbed for the most part the way I see it, and wayne allowing anothe judge to working in my buddies territory (same reason I didnt attend the maxxsonics show last year). If you get their early on the 11th i can get you some meter time on the TL most likely, its my buddy that will be running the show. Be nice to meet ya too!

ya bro! I agree.. From what I hear, it looks like Treos bathtub after he gets done... Lols

Got sick of the SoundDigital bandwagon already? what a shame!

i hear porno music!

EPIC!

so anyways, about some new vids, where they at? You got a lot to show, like the new shop thats getting pretty full, and the hoe.

some noob! april 11th show > april 10th show :rofl: