ChrisLun

If I am not mistaken the V.2 is 1500 rms 18" D2: RE: 3.69 ohms Fs: 30.21 Hz Qes: 0.477 Qms: 7.65 Qts: 0.44 Le: 2.62 mH Vas: 126.61 L BL: 24.21 NA Cms: 69.35 uM/N Mms: 400 grams Sens: 90.47 dB 1w/1m ----------

If I am not mistaken, it must be a published.... No burns or MP3's

52 inch cabinet saw....are always the best

Going to work on it today about lunch time. Will get the basic shape done all I will need is the dimensions after I get it drawn. What you looking to have done? Whats the size limit? Possibly a enclosure for a single 18, 6.5 cubic ft box

Jacob, as we all know.......

Where do I send the payment ray for a design

Most bp's I have heard were not good for daily ground pounding. But that is possibly just due to the construction of the enclosure.

True.....didn't take that into consideration.....wish I knew how to build horns, that would be sick.

I was originally gonna go with (4) xl 15's....but I only have (1) mechman 320a alt, and (4) Kinetick 2400's.....upgrading to xs3100's so I am limited on how muck power I can do....this is a build for a daily driver. That why I asked about what would work best.... Don't want to get (4) 15 on a 9k and my electrical won't support it

So I should stick around 360-400 then im with jeff. when I saw that I thought you had a typo.

20 cu.ft is the guess on the small side, the dimensions are: 50w x 40h x 20d.... With port being 15w x 30h.... but the rear will be built angled, so I might get another 3-6 cubes

My bad....really anxious... Tying to finialize the design so I can start my build log.

Bump

Ok, here's the deal. After months of debating, and pursueding of the wife, I have decided to build a wall in my 2006 Dodge Charger. Here the the breakdown, I was gonna originally do a bandpass but wanted something I would use on more of a daily so what I decided was a 20ft^3 enclosure with 600" sq inches of port area tuned around 37-40 hz. Was shooting for a 1000" but fell short. Now my question is 1: what subs would work best in a application like this (not which sub is best, but which will possibly preform better) looking for a min of 4. Now question 2: Will a enclosure of that dozens ok, with the amount of port area that I want or do I need to go bigger or smaller?

I agree, everytime I see her I just wanna punch her in face with a lvl 6 motor....but for 45 mil. a year I would be a dick too.....

Standing in front of my first Active Duty post trying to get in.... The chaos was so crazy. We were in threatcon delta...and I was fresh off the plane didn't know what was going on

He was running the Skar subs....

They are nice cars, I had one, red to be exact... To me they are worth it

I have never built a 4th so if there is any changes that could/ would be done please express em.... I wonder a clamshell would work better?

I am really considering doing a 4th order wall build in my car. My question is, will this idea work with 8 of the SA-12's.... 0.7^3 sealed and 13.5^3 ported with roughly 220-230 sq inches of port area. And also what type of power should be ran. Never build or played with a 4thso I am a boob to these. This will be for a daily ground pounder. So if this will not work for daily please say so also.

I am in the Houston/Cypress area.... Get at me, I ll be intrested

spray both pieces...it will take hold better

Got my samples in today, Thanks Jon....now I am really confused.....dont know if I wanna roll with the "Alpha Damp" or the Damplifier Pro" ....I may just do my Floor, Roof, Trunk, and Trunk Lid in the Pro and my doors in the Alpha.....IDK....

I know, and at one point in time they had " Stress" cards......DS was being to hard on you pull your "stress" card and he had to give you 10-15 mins of cool down time....I had a cousin that left in 08' for basic in the Army and he said thats what they were doing now....LOL I did 10 years before catching sharpnel to the back of the head after a IED went off and was medically retired...Loved every minute if.....Somedays I still miss it.