bassface

Good point about scratching the box, plus anything that is not bolted down on a painted floor will slide around.

12w7's

I probably wouldn't advertise this kind of practice on a sound forum where you MIGHT want to possibly sell something. I probably wouldnt buy from a guy willing to do something like that, and likely others won't either. Thats fine i dont sell things used anyways, i give them away.

Thats a great idea ray.

If i blow mine up im shipping them back, but ill slice the side of the box so they fall out and break.

Does port flex affect tuning?

have you looked into placing some in the a pillar? They seem to be a popular location.

was that gay porn?

For some reason I found this funny.

I was kidding about the 2 dots lol

If you have trouble there are videos on utube about series, paralel, and series paralel. They are actually pretty easy to follow, just make sure to test with an ohm meter.

I think "big guy" with 2 dots after it led him to believe you called him out.

So before reading this i assumed polyfill was only for boxes that are too small, now after reading it i am wondering if there is any downside to putting it in a box that is the perfect size?

Go outside maybe

Id actually run a 300 amp fuse up front and 300 in the rear. Only to keep as much flow as possible because you will probably lose some current over the wire run as well.

Any reason they are in a sealed box?

If you have to build box on the small side it can help.

Get a thick rubber mat, it smells just like new car.

I think using wire sheathing also wouldnt be a bad idea for a full undercar run. It may prevent any possible abrasions.

I got kicker 1/0 and its pretty nice.

Id color match it, flat black would look like its primered.

I normally call the manufacturer first and talk to technical assistance, if they know their product they should be able to crank out some numbers for you pretty fast. Because asking here you will probably get 10 different sets of numbers from 10 different people.

I would probably put some blue tape on the bottom of the jigsaw so it doesnt scratch the plexi. Also you may want to use wax on the blade, it will reduce friction.

Im old i still bump spice 1.