Eric B

Very nice speakers here folks! Order 'em up!!! :thumpsup:

Whats wrong with using plywood? Ive been using it a few years now and works JUST FINE!

Thanks took me about 2.5 hours to draw. Frame was a little tricky to draw. Its almost to scale but a little error but its fairly close to accurate.

If you go to the 3D Warehouse, there'll you'll find a SA-12 I drew out of boredum. Have fun!!!

Z series has always been my favorite. v3 is supposed to drop late spring/early summer i believe. Correct me if im wrong.

Unless you have a JBL GTi 6000

Hey, that reminds me, I have BBP6 on my HD somewhere. I tried using it a while back, couldn't get it to work out like I thought it should so I stopped using it...seemed too advanced for me. I'm gonna have to check it out and keep messing with it.So check out this box, this is why I asked the question...I always see boxes done like this instead of close to the port as suggested More or less people do that for appearance. Ive never heard a difference. Is this box for SA's?

Try some of the JL shallow mounts or better yet the Memphis shallow mounts

Pry 5cu ft. That's what the Z v.2 and NS v.2 like.

At MidwestSPL finals there was a guy who had a blazer and the both back windows had LED equalizers that went with the music. Was wicked!

6 12s BUT the box will have to be about 12cubes and about 120sq in of port tuned at 30hz for nice flat response with a good deal of output. Ive messed with SA-12s enough to know what they like. I have my 6 SA12's in 12 cubes with 130" of port tunes to 34 and it hammers. I have played with port sizes from 87" up to 150 and the I agree with Eric about the 120-130 range. Tuning is a different story, I dont see a need to tune that low, but to each there own.. I assumer you're in a suv do you goto the windowline or to the headrest? Does it hit hard 55hz to 65hz? His is actually in a car walled. But yes his 55 to 65 range still plays hard iirc

does ash disappear when it hits the ground? No, but its okay.. they make vehicles for it. We get white ash all the time in Iowa. We even have special trails for these when the ash falls.

6 12s BUT the box will have to be about 12cubes and about 120sq in of port tuned at 30hz for nice flat response with a good deal of output. Ive messed with SA-12s enough to know what they like.

BHAHAHAHHAHAHAHAHA

200 for 1500rms sub? Good luck.. now let's try this again and be realistic!

Putting just resin alone well not add any strength at all people, stop saying that!!! If you want strength with fiberglass resin.. USE CLOTH OR CHOP MAT WITH IT LIKE ITS SUPPOSED TO BE USED WITH!!!

BUMP

Okay we're done here. Nothing but a pissing match with people that don't know how to aim.

I understand impedance rise is a big factor in SPL comps, but must I be worried about this for a daily groundpounder system?? I answered your question.

No

Well a heat sink is made for a reason.. I mean if you don't expect something to heat up that is drawing more current than your house in a footprint the size of a skateboard, your nuts. If you think its the ground which can help contribute to it add some more runs to it. Or find a better spot.

Build the frame in your car first. then design the enclosure. You design like you designing a regular box, whatever that may be.

Bump