jmsonoma03

damm looks like you got a big ass snake in there

i just checked memphis website it pretty much is a epicenter it might help in comps though you can choose what freqency you want to boost so what ever your box is tuned to match it it might give you better ##sss

you should be ok you might have to use the built in xover in the deck though which works pretty good.

yeah- but should you really have amps that look nicer than the vehicle its in.

i think its just there own version otf the epicenter im sure you know what a epicenter does processes music that has no or little bass and give you a shitload of bass i dont think it would help your van much unless you want to listen to a little espanol or jazz or good ol rock.

see if uncle steve has any extra bd 1500s laying around

the pioneer has alot better output got to be easy on the highs output have you gotten a demo of the mclass amp i would recomend it if you havent ive installed a few sound ok but not crazy about them. good luck getting tweets up and going again.

i hope your mom is ok and have a safe trip.

like i said those memphis pr's sound good but its to easy to blow tweets. did you ever get that new pioneer deck in it should be alot cleaned signal than a kenwood . i think its a design flaw of memphis you should have you freind talk to his rep and see what he recomends how high does your kicker amps high pass xover go up to wonder if you could run mids off rear channels and tweets crossed over higher off the fronts you would have to disconnect the caps off the mids and connect to amp directly dont know if impedence would work for mids though just a thought might not work. maybe its time to upgrade to m class i know you want mids to match subs but hey they will still be memphis.

hey steve are you going to the show in sac on the 27th and how about the bassick boys

im sure it has nothing to do with the deck or rca its probally the solder connections in the amp i have the same problem with a used amp i just got when i have time im going to open it up and check connections.

nice car

nice progress every thing is looking good wiring thoses xovers are going to be fun did you mark each wire or you just going to pop them one by one then connect to proper xover .

thanks bro

does any one know what the price of 2- lvl 4 15" would be i pm rusty no responce unless i did it wrong

that needs to happen here in california

glad to hear you are better good luck on the other 5%

looking good that is probally going to be the biggest pain in the ass of the whole build keeping all those speakers in phase is going to be fun for ya good luck

ill have to check out what kind of glue it was probally cheap shit

if it only neaded glue not nails then the box wouldnt of blown apart im going to screw the hell out of it before i put it back in . i dont think glue will hold a box tegether with four twelves and 3000w.probally why steve and alot of other guys fiberglass there boxes cant just glue together

hey thanks i found it . wasnt even paying attention

TODAY STARTED OFF GOOD I GOT 30 FT OF 0GA GROUND WIRE FROM A FRIENDS SHOP YESTERDAY TODAY I RAN IT . AFTER I WAS FINISHED I WENT TO TEST SYSTEM OUT IT SOUNDED GOOD UNTIL I TURNED UP THE BASS . I HEARD A LOUD NOISE I WENT TO THE BED WHERE MY CUT THROUGH BOX IS AND HEARD WOOD VIBRATING I CHECKED THE BACK SIDES AND BACK OF THE BOX THEY FELT SOLID THEN I WENT INSIDE AND LOOKED INSIDE OF MY BOX AND NOTICED THAT THE NAILS THAT WERE SUPPOST TO HOLDING THE BOX TOGETHER WERE SNAPPED IN HALF AND THE BOTTOM OF BOX WAS VIBRATING (CHEAP FUCKEN HARBOR FREIGHT NAIL GUN AND NAILS) .SO I HAD TO REMOVE ALL OF MY AMPS AND OTHER STUFF TO REMOVE THE BOX .THE BOX HAS FOUR 12" SUBS AND IS F N HEAVY INSTEAD OF FIXING THE BOX AND PUTTING IT BACK IN I DECIDED TO PUT MY OTHER BOX WITH TWO JL 15W3S PORTED BACK IN IT INSTEAD AND IM GLAD I DID I FORGOT HOW GOOD AND LOW THEY HIT. IVE BEEN WANTING TO DO NEW SUBS FOR A WHILE BUT CANT DESIDE ON 12" OR 15" FI RE OR DC OR EVEN AA BUT I THINK THE ANSWER WILL BE NEW 15" SUBS FROM ONE OF THE FOUR WHICH IS EVER THE BEST DEAL. SO LONG STORY SHORT AFTER HOOKING EVERY THING BACK UP THE ENGINE NOISE PROBLEM I HAD BEFORE IS NOW GONE.

i was expecting different pics

i feel the same way rear speakers are needed just get a pair of 6.5" components and build a adapter plate and mont in 6x9 hole

sorry kenwood sucks thats why they are sold at best buy.