Search the Community
Showing results for tags 'RF'.
-
I am not the one to right a review. But since I purchased a 320 Amp Alternator for the Jeep Commander here are the lows and highs of it on system. Low idle charging on meters-14.3 volts High dle charging on meter-14.9 volts. These are a beast and has taken care of the charger being put on everyday. Buy Mechman!!!!!!!!
-
Alright guys I have an issue, I'm just not sure exactly where or what. Ill try to include as many details as possible. My current set up: 2007 Jeep Grand Cherokee with "premium" speakers and amp. Details on that here Pioneer AVH-5500BHS bypassed Rockford Fosgate T1500.1BD 1 15" Fi BL @ 1Ohm 4GA power wire So to my issue. I've had this amp for about a year and a half now. About 6 months ago i noticed that occasionally I would hear a very high pitched humming and my amp wouldn't come on. This always happened when I started my car, i assumed that it was because the inside of my Jeep was hot so it went into protective mode. Yesterday it happened again, drove it home, left about an hour later (parked in shade) and it came right back on. This morning I was driving to work and it was working fine and suddenly my amp died. Got to work and checked the fuse, it was blown. I've never blown a fuse until today. Thought it was a fluke and put another in at lunch, it was hot inside my Jeep again (all black is HELL) and it did the humming so let it sit. about 30 mins later it came on when i stared my Jeep. Started to listen to a song and the moment I turned it up I blew another damn fuse! 2 in one day, what the hell! I come home disconnect my amp, check all of my wiring which i believe is good. Reconnect all of it, I have the power light come on the amp.... but no bass. Turn it off and restart my Jeep, and i get the humming, amp isn't on. I learned that the humming is coming from the 2 front speakers on the dash not the amp. Took out the fuse and put it back in, I went to check the power (not running but just power) and i have the light but once again no bass so i turn the Jeep on and now I'm here. Amp not working and humming constantly coming front 2 dash speakers. Does anyone have any ideas of what this could be? Bad wiring somewhere? Faulty factory amp interfering? Bad RF amp? I'm at a loss any help will be greatly appreciated.
- 3 replies
-
- RF
- Rockford Fosgate
-
(and 3 more)
Tagged with:
-
This is my first system. I am in high school so equipment comes in stages but here is what I got. This is my first system and build. I am in high school so i do not have much money so everything comes in installments. I have it pretty much close to being done. System includes:(2) AQ SDC2.5 15 d4 (1) hifonics hfi1500 (1) kicker 550.2 (temporary for front speakers) (1)shuriken BT-20 battery (1) 20FT strand of kicker 0 gauge (2) EFX distrobution blocks (1) kciker afs/anl fuse block (1) kicker 200 amp fuse (2) RF prime 6x8's (1) RF prime tweeters (2) streetwires zn1 rca's(speakers) (1) streetwires zn9 (sub) 80+FT of EFX 14 gauge wire HU- sony mex-bt39uw about 3FT dynamat/expansion foam (1) volt meter Other mods done to my car: (1) ledglow multi color led's under front dash (2) cupholder lights (1) satellite radio (3) switches for led's and cupholder lights The sketchup Got some wood!(no homo) Here are some pics of my other mods in my car while my box was drying. Amp rack sony mex-bt39uw RF prime tweeters box done subs in! kicker 0 gauge ran! shuriken BT-20 streetwires zn1( speakers/tweeters) My first flex video. This is with the one run of 4awg i will get a video with the 0awg soon. Hope you liked my build! check back for more vids soon to come!