Jump to content
Sundown Audio

aq1200d clipping


max785

Recommended Posts

Posted

you're obviously convinced you are right and everyone else is wrong. just do your thing.

THERE IS NO BUILD LOG!

1998 Chevy Silverado ext cab

Alpine CDA-9887

4 Team Fi 15s

2 Ampere Audio TFE 8.0

2 Ampere Audio 150.4

3 Digital Designs CS6.5 component sets

Dual Mechman 370XP Elite alternators inbound!

8 XS Power d3400

6 XS power d680

Second Skin

Stinger

Tsunami Wiring

Sky High

A Real Voltmeter not a piece of shit stinger.

Posted

also my HU have a usb sla setting . I don't know if this could be a problem ?

2001 civic dx

2 X sa12's "

1 X aq1200d

Knukonceptz 4 gauge , rca

Posted

Pioneer HU´s clips a lot if you are not careful, i´ve been using them for 3 years now and i honestly like them, they sound ok for the price, set the volume no more than 40 out of the 62 , boost at 0, SLA +3 , loudness on high (some people dont like this, for me, it sounds the best this way) and mess around a little bit with the EQ, after this, you go to the amplifier and set the gain...

I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion!

2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/

8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/

Posted

How accurate is the clip light anyways to be honest? Mine blinks on certain songs and whatever and I never smell coil and my subs get warm at most and still sound clean. I wouldn't freak over it. And why not just turn your knob down just a little so it stops blinking if you are worried?

formerly known as Jaylor Swift

Posted

my stetsom clip light is way off, it was showing clipping at vol 28~ for light clip and 32 for hard clip, aaron and dustin *gotz1lung and dwright27* took a oscope and it showed no clipping on my amp up till vol 38...

they could be off

but setting by a DMM does not prevent clipping... as i said before... portable oscopes are like 120 bucks or something, sanitarium linked in another thread

The DC Integra 3 18s to 6 15 build log

Team_DC-Derrick's Youtube

Team DC Audio

where theres a will theres a wall.......

I just realized Steve has reach Voldemort status, over on JP's site he is the one who will not be named....."We dont speak his name over here, fearing it will destroy us" LOL not even in hush tones

Posted

maybe because of my electrical and my voltage drop ?

2001 civic dx

2 X sa12's "

1 X aq1200d

Knukonceptz 4 gauge , rca

Posted

maybe because of my electrical and my voltage drop ?

Maybe because you should turn it down a little. Set the radio to where you want the listening volume and THEN turn the knob up.

My h/u goes to 32 but i listen to it at like 18-24. Just because it can go higher doesn't mean it needs to. If I went all the way up, my ears would bleed from my door speakers being all distorted.

formerly known as Jaylor Swift

Posted

ok I reset my radio and all the stuff . I tested again my rca voltage and it was like 1.1v output now.

2001 civic dx

2 X sa12's "

1 X aq1200d

Knukonceptz 4 gauge , rca

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 641 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...