Bleu Posted August 5, 2012 Report Posted August 5, 2012 I have a small tear on the surround, a screw was stripped and as I was trying to unscrew it the screw driver slipped and poked a small tear in it. Is there any type of glue that can repair it? its a sa 8 d4 1
jlh2003 Posted August 5, 2012 Report Posted August 5, 2012 I have a small tear on the surround, a screw was stripped and as I was trying to unscrew it the screw driver slipped and poked a small tear in it. Is there any type of glue that can repair it? its a sa 8 d4 goop 1 http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=88276 AlphaDamp CLD Tiles - Get more sound deadening using less sound deadener http://www.secondskinaudio.com/products/AlphaDamp.php
AMERICAN BASSHEAD Posted August 17, 2012 Report Posted August 17, 2012 I have 2 15" Zv.2's and i would like to re-cone them with NS soft parts and Zv.3 coils. i am looking for daily and comp applications since i compete every weekend, is this possible? if not what would be my best set up as far as parts and option's? i am running them off a SAZ-3500, thanx for ur time
sundownz Posted August 20, 2012 Author Report Posted August 20, 2012 I have 2 15" Zv.2's and i would like to re-cone them with NS soft parts and Zv.3 coils. i am looking for daily and comp applications since i compete every weekend, is this possible? if not what would be my best set up as far as parts and option's? i am running them off a SAZ-3500, thanx for ur time The Z v.2 does not accept a Z v.3 coil -- you can use the cone, spider, and surround, though. - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
soBASED Posted January 8, 2013 Report Posted January 8, 2013 Hmm, found someone who's selling a Zv2 10", didn't see a recone tho? Any info on reconing this?? Car:- 2013 Honda Accord Sport 6MT - aFe SRI Electrical: - Big 3 w/ Execution Audio 0/1 AWG OFC- Stock Battery Audio: - JBL Power Series 6.5 Comps up front (Running off HU power atm) - JBL Power Series 2-Ways in the rear deck (Running off HU power atm) Subwoofer: - Sundown Audio X-15 - CT Sounds AT1400.1D (@1 ohm) Bedroom: - Yamaha RX-V365 - Pair of Klipsch KG4.2's - 2 E8v3's in a 1.34ft^3 tuned to 30hz - No Amp yet.. - CoolMax ZU900B PSU for amp In my room & previous car:- Amp: Soundstream TX1.1300D @ 4 ohms (520 watts)- T-Line Enclosure tuned to 32hzYouTube : http://www.youtube.c...r8?feature=mhee
sundownz Posted January 15, 2013 Author Report Posted January 15, 2013 Hmm, found someone who's selling a Zv2 10", didn't see a recone tho? Any info on reconing this?? We rarely made Z v.2 10s -- the gap is very tight and the 10" 12-spoke doesn't lend itself well to coil stability. Most of the Z v.2 10s floating around were DIY. But what does usually work is an NS v.1 style kit with a Z v.2 coil -- which is same price as a Z v.3 10" kit. If you could possibly re-cone to a 12" you would be better off, IMO. - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected]
soBASED Posted January 15, 2013 Report Posted January 15, 2013 Hmm, found someone who's selling a Zv2 10", didn't see a recone tho? Any info on reconing this?? We rarely made Z v.2 10s -- the gap is very tight and the 10" 12-spoke doesn't lend itself well to coil stability. Most of the Z v.2 10s floating around were DIY. But what does usually work is an NS v.1 style kit with a Z v.2 coil -- which is same price as a Z v.3 10" kit. If you could possibly re-cone to a 12" you would be better off, IMO. Thank you, I happened to see a Z v.2 10 on eBay that had cracking surrounds so I said let me look into this. Car:- 2013 Honda Accord Sport 6MT - aFe SRI Electrical: - Big 3 w/ Execution Audio 0/1 AWG OFC- Stock Battery Audio: - JBL Power Series 6.5 Comps up front (Running off HU power atm) - JBL Power Series 2-Ways in the rear deck (Running off HU power atm) Subwoofer: - Sundown Audio X-15 - CT Sounds AT1400.1D (@1 ohm) Bedroom: - Yamaha RX-V365 - Pair of Klipsch KG4.2's - 2 E8v3's in a 1.34ft^3 tuned to 30hz - No Amp yet.. - CoolMax ZU900B PSU for amp In my room & previous car:- Amp: Soundstream TX1.1300D @ 4 ohms (520 watts)- T-Line Enclosure tuned to 32hzYouTube : http://www.youtube.c...r8?feature=mhee
Chris Hammer Posted February 27, 2013 Report Posted February 27, 2013 Will yal recone a memphis sub and bring it to yals specs its a older 15" mojo Go talk to PSI / fixmyspeaker.com ..if its not a 3" coil I don't think they will do it though....Go on Caraudio.com and talk to SPlaudio..he can probably do one. Nothing sundown will do will amke a Memphis MOJO to ya'lls specs..because its not a sundown sub..not a sundown motor..its a memphis..you want sundown..buy sundown.. MY BUILD *****http://tinyurl.com/gmcbuild***** Vehicles 2005 GMC Canyon CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.) crf250r - Used to be race bike..now I just trail ride..practice at the track on it. CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg Sold to: Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585 Shower farts still piss me off.I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot.
HunterJohnson Posted February 27, 2013 Report Posted February 27, 2013 (edited) I'm wondering if its possible to make my Zv3's 12" with a lower FS I know that will affect power handling but that is okay. I'd like my fs to be in the 30hz range, currently it is 40hz is there a softer spiderpack or something I can do to recone it to a lower FS Edited February 27, 2013 by HunterJohnson 1 Scion tC SQ BuildiPad mini, lots of fabrication, daily drivenFord Explorer C Pillar Wall Build Just a cheap car to destroy with bass
Recommended Posts