CleanSierra Posted August 31, 2011 Report Share Posted August 31, 2011 Just the mat. As long as you know the weight if what you're using. Not that chop and woven is the same. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
dereileak Posted August 31, 2011 Author Report Share Posted August 31, 2011 Please tell me you put something around where those wires come through the hole you made. A grommet, some tape, something atleast. ha ha, dont worry, I didnt put any thing there, but I grinded it down with a grinding stone, its not sharp around the edges, and its smooth dont worry I thought of that I would still put a grommet there, sharp edges or not. Should have grabbed more resin at that price lol, doors are starting to look good though well basically they were under the wrong price tag, it rang up for 35, I said "hey, it said it was 17 back there" (which was for a quart), so they guy said ill let you have that 1 for that price, I think ive used about 1/4 to 1/3 for just that one door, so one more gallon should do it, resin is like 28 at this other store called fleet farm, that is where ill get my next can but its not 3m, its like some brand with a C and is green, so idk if it shrinks Someone else can chip in that knows for sure, but I remember reading on here that the fiberglass you get at Home Depot or Lowes is not very good. Personally, I have no clue what is or isn't good fiberglass but they linked this page US Composites and suggested buying from there. Sweet build though man, keep up the good work!!! would this stuff be good to get for my type of building ? 435 Standard Polyester Layup Resin, or do you get a different kind? its on this page here West coast link to 435 standard also what brand does steve use? (Marine Grade Resin) 2006 Mazda3 Hatchback Black 5 Spd ManualPioneer 4300DVD2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)Kicker 10ZX2500.1 (2845 RMS) Sub AmpKicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)Kicker KQ3 Active CrossoverKicker KQ30 EqualizerKicker 09QS60.2 Components (Woven Carbon Cones)Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -) 1/0 Gauge KNU Kollasal Flex (1 Run for -) 300 Ft Kicker X-Series 16 Gauge Speaker WireXS Power D3400 (Rear)XS Power D3100 (Front)Singer Externally Regulated Alternator (Being Built)+ The Love for Car Audio and BASS <3UBL Build Log <------- Click Here-------> Normal Build Log (For Comments) Link to comment Share on other sites More sharing options...
dereileak Posted September 1, 2011 Author Report Share Posted September 1, 2011 alright, I have a great idea, im thinking of building that port on my box like the plans show, but at the end have a door that opens and shut that can seal it off from ported to sealed, on top of that its going to be motorized, so I hit a button, boom it opens up and adds 3-4db's , and when I want to go back to SQ hit the button again sick idea huh, im seriously thinking this, I think I may build the port tomorrow, what you guys think? my step dad has been an engineer for 30 years, so im sure he could help design the device on it 2006 Mazda3 Hatchback Black 5 Spd ManualPioneer 4300DVD2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)Kicker 10ZX2500.1 (2845 RMS) Sub AmpKicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)Kicker KQ3 Active CrossoverKicker KQ30 EqualizerKicker 09QS60.2 Components (Woven Carbon Cones)Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -) 1/0 Gauge KNU Kollasal Flex (1 Run for -) 300 Ft Kicker X-Series 16 Gauge Speaker WireXS Power D3400 (Rear)XS Power D3100 (Front)Singer Externally Regulated Alternator (Being Built)+ The Love for Car Audio and BASS <3UBL Build Log <------- Click Here-------> Normal Build Log (For Comments) Link to comment Share on other sites More sharing options...
Purplehaze Posted September 1, 2011 Report Share Posted September 1, 2011 alright, I have a great idea, im thinking of building that port on my box like the plans show, but at the end have a door that opens and shut that can seal it off from ported to sealed, on top of that its going to be motorized, so I hit a button, boom it opens up and adds 3-4db's , and when I want to go back to SQ hit the button again sick idea huh, im seriously thinking this, I think I may build the port tomorrow, what you guys think? my step dad has been an engineer for 30 years, so im sure he could help design the device on it I think it sounds cool, but getting it to work properly is a whole other story. Think about how it has to seal air tight, and w/all the force of air, Idk??? Good luck though, I hope you figure it out! Cause that would be WAY cool! Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
DudeWith4x4 Posted September 1, 2011 Report Share Posted September 1, 2011 Or you could build a different box thats ported to like 32-35 hz and will have good SQ.. -Ross Project Layla Truck: 99' F-150 Gathering things for my next build. SoloX18 build: http://www.stevemead..._1#entry1576460 RE T-line build: http://www.stevemead...-between-build/ Link to comment Share on other sites More sharing options...
dereileak Posted September 2, 2011 Author Report Share Posted September 2, 2011 Or you could build a different box thats ported to like 32-35 hz and will have good SQ.. first off I cant build a different box, you guys dont understand, this box is maxing out my hatch already, unless I dont wanna see out my back windshield, and I do 2006 Mazda3 Hatchback Black 5 Spd ManualPioneer 4300DVD2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)Kicker 10ZX2500.1 (2845 RMS) Sub AmpKicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)Kicker KQ3 Active CrossoverKicker KQ30 EqualizerKicker 09QS60.2 Components (Woven Carbon Cones)Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -) 1/0 Gauge KNU Kollasal Flex (1 Run for -) 300 Ft Kicker X-Series 16 Gauge Speaker WireXS Power D3400 (Rear)XS Power D3100 (Front)Singer Externally Regulated Alternator (Being Built)+ The Love for Car Audio and BASS <3UBL Build Log <------- Click Here-------> Normal Build Log (For Comments) Link to comment Share on other sites More sharing options...
DudeWith4x4 Posted September 2, 2011 Report Share Posted September 2, 2011 just buy my 18 -Ross Project Layla Truck: 99' F-150 Gathering things for my next build. SoloX18 build: http://www.stevemead..._1#entry1576460 RE T-line build: http://www.stevemead...-between-build/ Link to comment Share on other sites More sharing options...
dereileak Posted September 2, 2011 Author Report Share Posted September 2, 2011 just buy my 18 ha ha, why you selling it? 2006 Mazda3 Hatchback Black 5 Spd ManualPioneer 4300DVD2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)Kicker 10ZX2500.1 (2845 RMS) Sub AmpKicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)Kicker KQ3 Active CrossoverKicker KQ30 EqualizerKicker 09QS60.2 Components (Woven Carbon Cones)Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -) 1/0 Gauge KNU Kollasal Flex (1 Run for -) 300 Ft Kicker X-Series 16 Gauge Speaker WireXS Power D3400 (Rear)XS Power D3100 (Front)Singer Externally Regulated Alternator (Being Built)+ The Love for Car Audio and BASS <3UBL Build Log <------- Click Here-------> Normal Build Log (For Comments) Link to comment Share on other sites More sharing options...
dereileak Posted September 2, 2011 Author Report Share Posted September 2, 2011 Alright, I tested out these lights on my computer, im gonna get a bunch more to do my car with 2006 Mazda3 Hatchback Black 5 Spd ManualPioneer 4300DVD2 Sundown SA-12 (34hz Tune, 3.22 cubes, 14.5 inches per cube, Triple Baffle)Kicker 10ZX2500.1 (2845 RMS) Sub AmpKicker 11ZX650.4 (705 RMS) Mid Amp -- (3 Amps)Kicker KQ3 Active CrossoverKicker KQ30 EqualizerKicker 09QS60.2 Components (Woven Carbon Cones)Kicker 09QS65.2 Components (Woven Carbon Cones) - (3 Sets)2/0 Gauge Electron Beam Technologies (3 Runs, 2 +, 1 -) 1/0 Gauge KNU Kollasal Flex (1 Run for -) 300 Ft Kicker X-Series 16 Gauge Speaker WireXS Power D3400 (Rear)XS Power D3100 (Front)Singer Externally Regulated Alternator (Being Built)+ The Love for Car Audio and BASS <3UBL Build Log <------- Click Here-------> Normal Build Log (For Comments) Link to comment Share on other sites More sharing options...
DudeWith4x4 Posted September 2, 2011 Report Share Posted September 2, 2011 just buy my 18 ha ha, why you selling it? I get bored to easy man. Wanna do something different -Ross Project Layla Truck: 99' F-150 Gathering things for my next build. SoloX18 build: http://www.stevemead..._1#entry1576460 RE T-line build: http://www.stevemead...-between-build/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.