some calculations wrong ...will this box be ok?

[CstrokerV]

I have four level 3 tens my planes where 4 cubic feet tuned to 32HZ on 2400 watts rms...

Well i built everything but top and i set the port in and measured it did the calculations well it turns out its 3.5 cubes and ended up being tuned to 34 hz...

you guys think this will be a problem? the reason i think i miscalculate is i did the inside of the port for displacement instead of outside..

anyways without redoing the box (a)do you think i should just leave it (b)or rebuild port and extend it 4 inches outside the box to get the 32HZ tuning

[Skullz]

With that power you should be fine with it on the smaller side for some cone control, i would rebuild it in time to get to a more optimum size for the subs.

[CstrokerV]

So you think i should change the tuning or leave it?

[Skullz]

Tuning is fine where it is and should sound very good.

[matt402]

should be fine. just test it out & see how u like it before u decide on rebuilding it.

[CJ18]

The tuning looks good to me. Just give it a shot and see how you like it before you haul off and rebuild.