dc=realbass Posted May 16, 2011 Report Share Posted May 16, 2011 i need to find an enclosure tuning calculator.. for 2 xl 18s tuning 32hz and 12cubes.. something where i can put in all the values and displacments from baffle to driver dislacements and everything.. i wanna build this right.. thanks Quote Link to comment Share on other sites More sharing options...
Skullz Posted May 16, 2011 Report Share Posted May 16, 2011 The best there is. http://www.stevemeadedesigns.com/board/topic/38791-torres-box-tuning-calculator-updated-310/ Quote 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
R3nOSlaPP Posted May 16, 2011 Report Share Posted May 16, 2011 torres calc FTW Quote Vehicle: 2017 Chevrolet Silverado High Country Electrical: 320A Singer Alt, (2) Limitless Lithium 15ah, Full Throttle FT680-48 Speakers: Stevens Audio SA 6 (ACTIVE), Audio Designs 3” Subwoofer: (4) B2 Audio XM 8’s Amplifiers: (2) B2 Audio Rage 2500.1, (1) B2 Audio Rage 1200.6 Processors: NavTv M650 (integration), Helix DSP Pro MK2 Silverado Build Log Link to comment Share on other sites More sharing options...
matt402 Posted May 16, 2011 Report Share Posted May 16, 2011 i use http://www.the12volt.com/caraudio/boxcalcs.asp u would need to subtract .5 cube for the sub displacements & also subtract port & bracing displacements. what vehicle is this going in? do u know ur max dimensions? Quote Link to comment Share on other sites More sharing options...
dc=realbass Posted May 16, 2011 Author Report Share Posted May 16, 2011 i use http://www.the12volt.com/caraudio/boxcalcs.asp u would need to subtract .5 cube for the sub displacements & also subtract port & bracing displacements. what vehicle is this going in? do u know ur max dimensions? blazer.. i believe its max width is 38in between wheel wells and 30in from back of rear seat and hatch but rear seat is comin out for amp/battery rack Quote Link to comment Share on other sites More sharing options...
audiofanaticz Posted May 16, 2011 Report Share Posted May 16, 2011 build around and above the wheel wells and you can get a lot more space. I just built a box for a pair of 18s in a blazer. came out really nice! Quote Link to comment Share on other sites More sharing options...
dc=realbass Posted May 16, 2011 Author Report Share Posted May 16, 2011 (edited) build around and above the wheel wells and you can get a lot more space. I just built a box for a pair of 18s in a blazer. came out really nice! iv thought about it.. i really dont like that idea thou.. cause it would be weirdly shaped and less of a square or rectangle shape.. and more acoustic resistence inside box verses square or rectangle shape.. ill make the box tall and in between wheel wells with slot port firing at hatch or wall it its a hard decision.. well crap wheel wells are only 38in between i cant fit 2 18s across they would have to be offset cause box thickness is a factor as well.. ill have to build over wells just enough to fit them across. hell idk wall sounds like better plan now!! Edited May 16, 2011 by dc=realbass Quote Link to comment Share on other sites More sharing options...
audiofanaticz Posted May 16, 2011 Report Share Posted May 16, 2011 hence why i said build over the wheel wells. I went tight to the passenger side wheel well, and came over the driver side well 3 or 4 inches. however that extra room I gained, I lost due to making the same notch on the other side of the box to keep each chambers idenical. Quote Link to comment Share on other sites More sharing options...
RickyFriery97 Posted May 16, 2011 Report Share Posted May 16, 2011 hence why i said build over the wheel wells. I went tight to the passenger side wheel well, and came over the driver side well 3 or 4 inches. however that extra room I gained, I lost due to making the same notch on the other side of the box to keep each chambers idenical. thats a nice ass box! why the extra peice on the inside of the port wall? Quote 2014 Chevy Silverado Crewcab 1994 Chevy Full Size blazer Link to comment Share on other sites More sharing options...
dc=realbass Posted May 16, 2011 Author Report Share Posted May 16, 2011 hence why i said build over the wheel wells. I went tight to the passenger side wheel well, and came over the driver side well 3 or 4 inches. however that extra room I gained, I lost due to making the same notch on the other side of the box to keep each chambers idenical. thats a nice ass box! why the extra peice on the inside of the port wall? tht is nice shit dude.. im digging it lol.. that looks amaizng bro.. i got a buddy that builds boxes for a living for his own side job.. he got a wall of 4 xl 15s Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.