Guest Posted May 24, 2011 Report Share Posted May 24, 2011 so you're looking for 400rms at 2 ohms? http://www.caraudiodeals.com/audiopipe-apsm1200-p-4833.html says its a 4 channel but its mislabeled. Quote Link to comment Share on other sites More sharing options...
Supercharged DCs Posted May 24, 2011 Report Share Posted May 24, 2011 Damn, that's an expensive gift... Sure, you can run that amp to them. Adjust gain to where you don't clip, and it should work. Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012. Link to comment Share on other sites More sharing options...
lilizards1 Posted May 24, 2011 Author Report Share Posted May 24, 2011 Alright, thanks. Am i going to to have to bridge it to get the 400 watts going to the two subs cause im only running one positive and on negative out of the pair. Quote Link to comment Share on other sites More sharing options...
TeamHT Posted May 24, 2011 Report Share Posted May 24, 2011 How are subs wired specifically for a certain car? Quote Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
lowsound10 Posted May 24, 2011 Report Share Posted May 24, 2011 couldnt help but notice its orlando craiglist. i live in orlando if you need help pm me. i have a amp thats 2 channel im tryin to get rid of might work for you. Quote Vehicle: 2008 Mustang V6 Exterior: Blacked Out Taillights, Turn Signals, Side Markers-Black 18x8 Enkei ls5-6000k HID's Interior: Blue LED Strips with Module for Music-Hardwired Beltronics RX65 with Blue LED and remote button Sub: 2 10 inch custom subs Amp: Hifonics BRz 2600 Wire: Knu 0 gauge Headunit: Kenwood kiv-bt901 Damplifier: Fatmat Rattletrap Electrical: Stock Alt/Stock Battery/Big 3 Link to comment Share on other sites More sharing options...
BJD3 Posted May 24, 2011 Report Share Posted May 24, 2011 How are subs wired specifically for a certain car? Probably some proprietary connector. If I'm understanding correctly, he's planning on cutting it off anyway, so it doesn't really matter. Quote Anti Peel and Seal...lol You may be offended by the above. Don't take it personally, I'm just abrasive. 2002 Buick Park Avenue DC Level 4 M2 12 D2 Car Audio Bargain 1600.1 Eclipse CD3200 ~2 cubes @ 34 hz. Stinger Roadkill Expert Link to comment Share on other sites More sharing options...
lilizards1 Posted May 24, 2011 Author Report Share Posted May 24, 2011 How are subs wired specifically for a certain car? Probably some proprietary connector. If I'm understanding correctly, he's planning on cutting it off anyway, so it doesn't really matter. Exactly just gunna cut of the speaker wires from the rest of the piece Quote Link to comment Share on other sites More sharing options...
TeamHT Posted May 24, 2011 Report Share Posted May 24, 2011 :facepalm: Quote Tell me...does this smell like chloroform to you? Link to comment Share on other sites More sharing options...
lilizards1 Posted May 24, 2011 Author Report Share Posted May 24, 2011 The amp is 2 ohm stable 2 channel. Each sub is 2 ohm DVC. im going to wire the subs in a series so theyll be at 2 ohms. Do you think this amp can handle a 400 watts bridged at 2 ohms? Quote Link to comment Share on other sites More sharing options...
Winn Posted May 24, 2011 Report Share Posted May 24, 2011 If you wire both in series. seperatly to each channel it will be an ohm of 4. If you wire in parallel series it will come out to 2 ohm. But most amps are not stable bridged under 2 ohms i believe. Dont get a 2 channel with the setup you have. Get a mono block Quote You know how you avoid that? Man the fuck up and bang her best friend sister mom cousin worst enemy and never look back. JUST SAY ANTI-AUDIOPIPE Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.