Jump to content
Sonic Electronix

EVERYBODY please do this poll for my build

numatik

  

82 members have voted

  1. 1. What should be done for the S-20s Ext cab windows?

    • I keep the windows, and continue to rock the ext-ext cab
      36
    • My other idea, I create a large scale ext cab window with the same contour as the factory one, but super wide
      40
    • Select this if you have an idea, then post it
      6

Recommended Posts

Jd1102 Newbie

Jd1102

Posted
Posted

well just like justin said with the one big but don't include the back ext cab window. leave it normal

edit: the front window and the first ext cab put together like justin had said but the bach ext cab leave like it is so you can keep the ext ext cab look when you open the sucide door or roll the window down

Blue Newbie

Blue

Posted
Posted

You asked me to comment in here, I voted for the one big window. Since you have the front side contour and the back side contour just cut out the center section and fabricate it to look like a stock window would go in there. Granted its probably not going to be cheap to get a window custom made for it, but should be cheaper than the roof.

FYI I havent read the rest of the responses. just giving input.

formerly known as Blue86f150

its a 4th order just because its tuned in the 40z doesnt mean it wont reach down and jiggle your balls at sub 30 hz frequencies.

Regardless if they were dipped platinum and were stuffed in Beyonce's twat.....way too fucking exspensive

this sux camel dicks
Craig28 Newbie

Craig28

Posted
Posted

what do you get if you win this bet? lol

TEAM DC

Everything is a 150 on th earometer

Well I guess punching a woman is a good way to test your strength! You never know how strong you are until you cold-cock a woman in the head and break that bitches jaw.

Next time she tries to punch you in the stomach, whip your wiener out and chase her around. Show her who's boss.

numatik Newbie

numatik

Posted
  • Author
Posted

well just like justin said with the one big but don't include the back ext cab window. leave it normal

edit: the front window and the first ext cab put together like justin had said but the bach ext cab leave like it is so you can keep the ext ext cab look when you open the sucide door or roll the window down

ahh ok i think I got it

You asked me to comment in here, I voted for the one big window. Since you have the front side contour and the back side contour just cut out the center section and fabricate it to look like a stock window would go in there. Granted its probably not going to be cheap to get a window custom made for it, but should be cheaper than the roof.

FYI I havent read the rest of the responses. just giving input.

sweet thanks for the input! seems that idea is winning but damn its a close battle lol. I will probably be doing that next season.

what do you get if you win this bet? lol

hmmm.... how about a gold star, donated by another SMD user :drinks: lol

Gary 'Numatik' Eberle

West Sacramento, California

Vehicle build log (1) 'Aayla' Numatik's one and only, bodydropped pasted the doors Chevy S-20 Ext-Ext cab. This project ended after a horrible horrible motorcycle accident. There are so many mods it would fill an entire page in my sig. Check it out if you have A LOT of time to kill. http://www.stevemeadedesigns.com/board/topic/39785-numatiks-doored-s-20-bodydropped-on-doors-ext-ext-cab-10-subs-full-frame-build/?hl=%20numatik#39;s

Vehicle build log (2) 'Snow White' Daily/showstopper 2004 Chevy Silverado

Lays on 22s soon for 26s to run a beefy tire on 4s (4) 5gal tanks, (3)AZOB2 pumps, Slam digital stealth two speed valves with 16 solenoids, Slam SS bags all around, ART upper and lower arms, KP Components 6-link, KP Components watts link, Panther juice 6 22s, Spikes EVERYWHERE. 3,600WRMS total, (5) Kicker amps, (2) L7 15s under raised back seats, 15" screen molded to dash, 36 speakers total all Mb Quartz and Fosgate. Fiberglass console with removable face plates and arm rests, flushed speakers, lots of toggle switches, Playstation 2, rear view camera, Suede and leather seats, suede headliner, Dakota Digital air gauges, voltage gauges, and current draw gauges. (2) XS Power 4800 batteries, Whole truck is flat black and white and the

ENTIRE truck is fully pin striped by TJ Pagano here in Sacramento.

http://www.stevemeadedesigns.com/board/topic/123328-numatiks-bagged-2004-silverado/

smdsig1.png

"What doesn't kill you makes you stronger. I am proof" - Numatik

  • 1 month later...
bass_stalker Newbie

bass_stalker

Posted
Posted

i would say keep the two windows. less glass flex and what not if your gonna put 150+ dbs to it. plus it would make it more unique

JEEP BUILD PROJECT ANTIBLING.2000 jeep Cherokee.HEADUNITAlpine Cda-9886SUBSTAGE1 acendent 18" audio mayhem motor with a TI basket and tantric parts1 prototype DAT hellfire 1000.1HIGHSStockELECTRICALdb link 0 gaugeKnuconceptz Kolossus 4 gauge1 xs power d3400 under hoodBig 3 upgradeold fourwheeler build

The only way to delete your SMD account is for you crawl to steve meades door step on your knees and pleade for his forgiveness and acceptance to be released...He will either grant your wishes.....or choke you with a large piece of 0 gauge and electrocute you by hooking up a solid gold DC 12k at 0.000001 ohm and 10000 volts to your eye sockets and blow your head apart

You guys act like you have never clogged a toilet and ran around the bathroom frantically hoping it don't overflow.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Who's Online   0 Members, 0 Anonymous, 1599 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...