'91 Civic Hatch | (1)15" on 500 watts 31Hz | Low Power Bigger Output

[tbake223]

u got extra space to play with it looks like, rec specs for the ivx 15 is 3.5 cubes! its gonna be 300 rms at 3.5 cubes so if you are going smaller u might need more power. put a post into enclosures and see what the guys say.

JoeX gave me for my soon to be dc lvl 4 12, like 2 cubes at 17.5 port per foot which im happy with havnt made it yet tho!

[RooTxBeeR]

u got extra space to play with it looks like, rec specs for the ivx 15 is 3.5 cubes! its gonna be 300 rms at 3.5 cubes so if you are going smaller u might need more power. put a post into enclosures and see what the guys say.

JoeX gave me for my soon to be dc lvl 4 12, like 2 cubes at 17.5 port per foot which im happy with havnt made it yet tho!

Ya I will be running 600 watts, thus why it will be a 2.5Cu ft box. That should get loud to!!!

[RooTxBeeR]

Cut all my wood today for my new box. Will have pics up soon, going tomaybe start the construction. we shall see. Still need to go get a countersink bit.

[RooTxBeeR]

So here's the pics and a little more info. When I build my last box, I just cut the boards at the exact length off of a tape measure. SO when I started putting the pieces together they had overhangs because one board got cut to short. So this time I added 1/16-1/8 of a inch to each measurement to ensure I will have exact outer dimensions I want. The wood looks sooooo much better than MDF, and honestly, I paid around the same as last time. I do believe I cut my L2 part of my port to small. I thankfully have extra wood I can make a cut off of, if not 2x4 ft sheets are at home depot for $18. Will grab a countersink bit form my neighbor tomorrow hopefully. Along with that I want to get some sand paper to make the inside parts of the boards nice and soft. What would anyone recommend as far as what grades to gradually go through to get the finest softness possible. Here goes the pics.

FYI, all these pics are free standing, and the boards you see standing up are in the position the would be.

I don't have that great of a camera, when when you get close, the auto-focus goes berzerk. so this is the best shot I could get of the edges.

[Kevin M]

[RooTxBeeR]

Got my Turn On Relay kit from Tony over at CE Auto supply. Product looks great and can't wait to get it installed!

[tbake223]

wtf does that do

[RooTxBeeR]

wtf does that do

Allows me to run more than 3 things off of my remote lead wire. If you run to many thing off of your remote wire you could see problems. This allows me to safely run 14 things off of my remote wire.

[tbake223]

right on!

[RooTxBeeR]

So I had received the 250ft of 8awg wire on teusday but My shipping got split in two packages so I just decided to wait till I got the rest. But I have everything now and I am soooo HAPPY!!!! Can't wait to install it all this weekend. Here they are!

Here's the 8awg, 250Ft

The goodies

Stinger Volt Meter

Stinger 4000 6 channel RCA's

Didn't take any pics of the other stuff up front, nothing to fancy. 8 3" Xscorpion fans, and 2 5" fans. Along with that I got 500ft of 16awg wire. But here comes the best part, Skar IVX-15!!!

Fragile? lol riiiiiiight.

Box in a box

Final box

I need to make a new cut for my port, and I am going to remake my amp rack with the new birch wood to make it look better. Will get some serious progress going on this weekend.