Skullz Posted June 22, 2011 Report Share Posted June 22, 2011 2.25cf net tuned to 33hz/35hz would get you some good results. Quote 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
MONSONwarrior Posted June 22, 2011 Report Share Posted June 22, 2011 3.5 cubes is still too big, try and go around 2cubes... He's only running 1700 RMS so I'd say do more like 2.5 to around 34hz. Quote 2002 Chevrolet Trailblazer LT Jensen VM9223 | Pioneer Premier Comps | Audiopipe AP15001D | DC Level 4 XL 18 in 6 cubes @ 36hz | Deka 9A78DT | Knu 4 Gauge | Big 3 Link to comment Share on other sites More sharing options...
rezinated Posted June 22, 2011 Author Report Share Posted June 22, 2011 Getting a video up on youtube now...excuse me for my improper video edicate this is my first video ever...but out should at least give yall an idea to what I'm linking for Quote Link to comment Share on other sites More sharing options...
kirill007 Posted June 22, 2011 Report Share Posted June 22, 2011 read up first before building. 2.25cubes after displacements tuned to 33hz with 50 sq inches of port. If its a btl. The title says bl. So then 2cubes and 38sq inches of port and tuned to 32hz. Quote Thinking is the root of all problems... You ALWAYS get what you pay for. Link to comment Share on other sites More sharing options...
rezinated Posted June 22, 2011 Author Report Share Posted June 22, 2011 (edited) http://www.youtube.com/user/OtKReZiNaTeD?feature=mhee im lookin to get it around 32 hertz.. its a bl fully loaded with the 4 inch coil dvc 2ohm... how are you figuring the port area ive been using the port calculator and i guess im just doing it wrong.. what would i have to do to get 32 hertz at 2-2.5 cubes.. diagrams or quick sketches would be greatly appreciated Edited June 22, 2011 by rezinated Quote Link to comment Share on other sites More sharing options...
rezinated Posted June 22, 2011 Author Report Share Posted June 22, 2011 ideas ideas ideas??? how do i calculate how wide long and how deep my port needs to be sorry for being such a noob Quote Link to comment Share on other sites More sharing options...
Supercharged DCs Posted June 22, 2011 Report Share Posted June 22, 2011 Torres Box Calculator. Download it in the Subwoofer/Enclosure section. Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012. Link to comment Share on other sites More sharing options...
rezinated Posted June 22, 2011 Author Report Share Posted June 22, 2011 it wont let me run it and ive already got the new frame work and everything... is there any way else? Quote Link to comment Share on other sites More sharing options...
OBI Posted June 23, 2011 Report Share Posted June 23, 2011 it wont let me run it and ive already got the new frame work and everything... is there any way else? http://www.stevemeadedesigns.com/board/topic/40479-enclosure-designing-tutorial/ Here you go. I still use this, but use Torres calculator to get me a general idea. Quote Link to comment Share on other sites More sharing options...
rezinated Posted June 23, 2011 Author Report Share Posted June 23, 2011 so this is what ive decided to go with... 2@32hz #3 http://www.srtforums.com/forums/f40/official-free-ported-box-plans-56k-no-435910/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.