95blazer Posted June 29, 2011 Report Posted June 29, 2011 i have a pioneer headunit and it only comes with 1 pre amp rcas out in the back and i want to run a 4ch and my sub amp what would be the best way to do it? open to all sugestions. Quote
BassJunkie Posted June 29, 2011 Report Posted June 29, 2011 Upgrade the head unit to another pioneer with 3 sets 4v preouts Quote 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router.
vettedude102 Posted June 29, 2011 Report Posted June 29, 2011 (edited) You could use a y splitter they aren't too expensive. Since you need two more rca's I guess a total of four of them. Not 100% sure if it'll work though. Edited June 29, 2011 by vettedude102 Quote 2 polk audio 4x6'skenwood head-unit 220 amp Mechman alt1979 Corvette 2003 corvette z06 alpine radio and the bose system that came stock
95blazer Posted June 29, 2011 Author Report Posted June 29, 2011 Upgrade the head unit to another pioneer with 3 sets 4v preouts is there any other way to do it because its like a brand new headunit? Quote
Watch the bass Posted June 29, 2011 Report Posted June 29, 2011 Upgrade the head unit to another pioneer with 3 sets 4v preouts is there any other way to do it because its like a brand new headunit? The Y splitters or a other HU, thats it. Quote "in the abundance of water, the fool is thirsty" Bob Marley
R3nOSlaPP Posted June 29, 2011 Report Posted June 29, 2011 get y splitters the only problem with this (since im doing it on my pioneer with only 1 pre out) is that all the mids in the doors and in the front of the vehicle will be faded to the rear meaning your mids and highs will be picking up alot of the bass as well but if you have a mid/high amp then just dont crank the gain and put the lpf higher Quote Vehicle: 2017 Chevrolet Silverado High Country Electrical: 320A Singer Alt, (2) Limitless Lithium 15ah, Full Throttle FT680-48 Speakers: Stevens Audio SA 6 (ACTIVE), Audio Designs 3” Subwoofer: (4) B2 Audio XM 8’s Amplifiers: (2) B2 Audio Rage 2500.1, (1) B2 Audio Rage 1200.6 Processors: NavTv M650 (integration), Helix DSP Pro MK2 Silverado Build Log
vettedude102 Posted June 29, 2011 Report Posted June 29, 2011 (edited) There was something about maxxlink in another thread Or you could possibly get an eq Edited June 29, 2011 by vettedude102 Quote 2 polk audio 4x6'skenwood head-unit 220 amp Mechman alt1979 Corvette 2003 corvette z06 alpine radio and the bose system that came stock
Skullz Posted June 29, 2011 Report Posted June 29, 2011 http://www.sonicelectronix.com/item_6655_Clarion-EQS746.html Quote 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2
kingleo Posted June 29, 2011 Report Posted June 29, 2011 An eq/preamp or a crossover. Are the best ways. Quote http://www.stevemeadedesigns.com/board/topic/77708-2002-millenia-system-re-build/page__view__findpost__p__1070977__hl__%2Bmazda+%2Bmillenia__fromsearch__1 http://www.stevemeadedesigns.com/board/topic/110130-2000-acura-integra-gs-4-door/page__view__findpost__p__1536749__hl__%2Bmazda+%2Bmillenia__fromsearch__1
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.